Sherwood V-756 When selecting the Favorite Condition, Favorite Cond on, Correcting a disc title

ENGLISH

Continued

When selecting the FAVORITE CONDITION

Each time a DVD Video is loaded, the LANGUAGE, TV SCREEN and PROGRAM MENU settitings should be adjusted to your favorite condition.

However, once the LANGUAGE, TV SCREEN and PROGRAM MENU settings for a DVD Video are memorized using the SAVE FC (Favorite Condition), each time a disc is loaded, your chosen settings will be selected automatically.

1	After adjusting the LANGUAGE and TV SCREEN settings to your favorite condition, tilt the
	CURSOR/ENTER button upward or downward to select the FAVORITE CONDITION, then press
	the CURSOR/ENTER button.
	RC	RC	FAVORITE CONDITION menu
			S A V E	F C
			F A C T O R Y D E F A U L T S
			R E L O A D	F C

Memorizing the favorite condition for the LANGUAGE, TV SCREEN and PROGRAM MENU on the current disc.

Each favorite condition for up to 30 DVD Videos can be memorized.

Tilt the CURSOR/ENTER button upward or downward to select the SAVE FC, then press the CURSOR/ENTER button.

2	The EDIT TITLE mode that requires							EDIT TITLE mode
	entering a disc title.	E D		I	T	T	I	T L E
			-	-	- -	-	-	- -

Tilt the CURSOR/ENTER button upward or downward to enter the disc title as your preference. 3 Each time the CURSOR/ENTER button is tilted upward or downward, the characters change as

follows ;

		0	1	2	--------- A B --------	X Y Z
4	Tilt the CURSOR/ENTER button right or left to move to the next digit after a character is entered
	on the digit.
5	Repeat the above steps		and	until the preferred disc title is entered.
	Up to 8 characters can be entered.
	Note : When the disc title is not entered, the favorite condition cannot be memorized.
6	Press the CURSOR/ENTER button to memorize the LANGUAGE, TV SCREEN and PROGRAM
	MENU settings along with the title entered.
	Then these are memorized and the				FAVORITE COND ON	is displayed on the DISC SETUP
	menu screen.
	After you change the favorite condition for the LANGUAGE, TV SCREEN and PROGRAM
	MENU on the same disc, if you perform the above steps					, the changed condition is
	memorized.

Correcting a disc title

1.In the EDIT TITLE mode, tilt the CURSOR/ENTER button right or left to move to the character you want.

2.Tilt the CURSOR/ENTER button upward or downward repeatedly to select the preferred character.

On a character, if the CLEAR button on the remote control is pressed, the character is cleared.

3. Repeat the above steps 1 and 2 until the disc title is corrected as to your preference.

42