Operations
BASIC PLAYBACK
Preparations
Turn on the TV and select the video input source connected to the unit.
To enjoy the sound of the disc from your audio system, turn on the audio system and select the input source connected to the unit.
Set the TV screen type correctly to match your TV.
ENGLISH
Before operation, enter the standby
1 mode.
The STANDBY indicator lights up. This means that the unit is connected to the AC mains and a small amount of current is retained to support operational readiness.
To switch the power off, push the POWER switch again. Power is cut off and the STANDBY indicator goes off.
In the standby mode, turn the power on.
2
RC
3 | Open the disc tray, then load a disc with | |
the printed side up. | ||
Main unit | RC | |
or
4 | Start playback. |
RC | |
| Main unit |
or
Note :
When you play a DVD Video, the menu display may appear on the TV screen. In this case, see “To start playback from the menu” on the next page.
Each time the POWER button on the remote control is pressed, the unit is turned on to enter the operating mode or off to enter the standby mode. In the stanby mode, if the OPEN/CLOSE button is pressed, the unit can be also turned on (and when there is a disc in the unit, the disc is automatically played back).
8 cm (3 inch) discs can be loaded on the inside circle of the tray, too.
The disc tray closes and playback starts. When the disc tray is closed by pressing the OPEN/CLOSE button, playback starts, too.
Example of DVD Video
TITLE MENU
Dogs 
Cats
Cows 
Horses
15