When selecting the Speaker Options

ENGLISH

Continued

When the 6.1 CH AUDIO OUTS of the unit are connected to the 6.1 (or 6) CH INs of your amplifier or receiver to enjoy high-quality audio and surround with the built-in decoder, these items should be set correctly.

Tilt the CURSOR/ENTER button upward or downward to select SPEAKER OPTIONS, then press the CURSOR/ENTER button.

	S P E A K E R O P T	S E L E C T : +
RC	RC

				To adjust the speaker setting.
S P E A K E R S E T U P
				To adjust each channel level
T E S T N O I	S E

				equally loud. (See next page.)
R E T U R N :		S E T U P :	F I N I S H

When selecting the SPEAKER SETUP

Tilt the CURSOR/ENTER button upward or downward to select SPEAKER SETUP, then press the

1 CURSOR/ENTER button.

S P E A K E R S E T U P S E L E C T : +


F R O N T L		/ R T Y P E		L A R G E

	D I S T A N C E			O	C M

F - C E N T E R			T Y P E	S M A L L

	D I S T A N C E			O	C M
R E A R	L / R T Y P E			S M A L L
	D I S T A N C E			O	C M
R - C E N T E R			T Y P E	N O N E

S U B W O O F E R			O U T	M I X E D

R E T U R N :			S E T U P :		F I N I S H

To adjust the speaker size connected.

To adjust the delay time.

To adjust the speaker setting depending on whether the speaker is connected or not.

To reproduce the low frequency range depending on the speaker settings.

2	Tilt the CURSOR/ENTER button upward or downward to select the preferred item, then press the
	CURSOR/ENTER button.
	Example) When selecting the FRONT L/R TYPE	Example) When selecting the DISTANCE

F R O N T L / R T Y P E	L A R G E
	S M A L L

Depending on your speaker type, you can select one of these following speaker types.

LARGE : Large speaker(s) which can fully reproduce the low frequency range.

SMALL : Small speaker(s) which cannot fully reproduce the low frequency range.

NONE : No speaker(s) connected. (It can be selected in the speaker types other than FRONT L/R TYPE.)

PRESENT : A speaker is connected. (It can be selected

in the R-CENTER TYPE only.)

LFE : When reproducing only the separate low frequency range that be contained in multi-channel sound systems such as DTS, Dolby Digital, MPEG Multichannel,etc. (It can be selected in the SUBWOOFER OUT only.)

MIXED : When mixing the low frequency range of the speaker(s) which is set toSMALL with that of subwoofer and reproducing them. (It can be selected in the SUBWOOFER OUT only.)

Tilt the CURSOR button upward or downward to

3 select the preferred speaker type, then press the CURSOR/ENTER button.


D I S T A N C E	- - -	C M

You can enter up 999 cm as the distance between the speaker and prime listening position.

One foot equals about 30 cm.

Enter the distance 17 cm with the NUMERIC

3 button, then press the CURSOR/ENTER button.

Example) When entering 150 cm.	RC
RC

Notes :

When the NONE is selected respectively for the front center and rear speaker types, the front distance cannot be entered.

When the NONE is selected for the front center or the rear speaker type, the corresponding speaker distance cannot be entered.