Connecting to TV with Audio and Video Inputs

CONNECTING TO TV WITH AUDIO AND VIDEO INPUTS

You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality, connect the MIXED AUDIO OUTs 1 to your amplifier or receiver.

To connect these jacks correctly, refer to “Connecting MIXED AUDIO OUTs 1” and “Connecting VIDEO OUTs” on the previous page.

Note :

If your TV has only a monaural audio input instead of stereo, you will need to use an optional audio cord which converts stereo audio output to monaural.

Do not connect the VIDEO OUTs of the unit to the TV through a VCR. Otherwise the image may be disturbed due to the copy protection builtinto the DVD software.

This Unit

ENGLISH

Monitor TV	COMPONENT VIDEO IN
	S-VIDEO IN
	VIDEO IN
	AUDIO IN

Green

Red

Blue

Component video cord (not supplied)

S-video cord (not supplied)

Video cord (Yellow, supplied)

Audio cord (Red&White, supplied)

CONNECTING TO ADDITIONAL COMPONENT WITH VIDEO AND DIGITAL OUTS

When these VIDEO and DIGITAL INs are connected to the corresponding VIDEO and DIGITAL OUTs of additional DVD player, etc., you can also enjoy high-quality audio and surround by using the built-in DTS/Dolby Digital/MPEG Multichannel decoder of this unit. If this is the case, be sure to connect the 6.1 CH AUDIO OUTs (and MIXED AUDIO OUTs ) to your amplifier or receiver.

When you connect the additional equipment with a digital output, before using, change the SYSTEM setting according to the type of the DIGITAL OUT jack of the equipment connected. (Refer to “SETTING THE SYSTEM” on page 29.)

The digital audio signal from either the OPTICAL or the COAXIAL DIGITAL IN can be directly transferred to both of the DIGITAL OUTs of this unit. If this is the case, be sure to connect these DIGITAL OUTs to your amplifier, etc.

A signal from the S-VIDEO IN can be directly transferred to only the S-VIDEO OUT and a signal from the regular VIDEO IN to only the regular VIDEO OUTs 1 and 2.

Depending on your use, the unit’s settings should be set properly. With DIGITAL OUT connections, the DIGITAL OUTPUT setting should be made from this unit and with 6.1 CH AUDIO OUT connections, settings for “D R C”, “SURROUND” and “SPEAKER OPTIONS” on the AUDIO SETUP menu should be made.

For correct connection and use, refer to “Connecting DIGITAL OUTs” and “Connecting 6.1 CH AUDIO OUTs” on the previous page.

The audio component such as CD player, etc. can be also connected to these DIGITAL INs only, not the VIDEO INs.

This unit

Video cord

(not supplied)