Chapter 5. Connecting the USB
You can connect the USB version of the TEAC
Note: You cannot interface the PCMCIA version of this drive to a Macintosh system. The Macintosh does not support the PCMCIA interface.
Connecting to a Macintosh System
Follow these steps:
1.Connect the appropriate end of the USB cable to the USB interface con- nector on the side panel of the
2.Insert the USB cable into a USB port on your Macintosh computer.
Note: Connect the cable directly to the USB connector on your Macintosh or
3.Connect the AC adapter cable to the AC power input on the PortaCD- RW drive (Figure 59).
Connection Sequence
1. power cable
2. USB cable
3. USB
4. power
headphones cable (not included)
USB cable
AC adapter cable
Figure 59. Connecting Cables
TEAC | 49 |