Installing the Driver Without a Floppy Drive
8.Click the Finish button to complete the installation.
The system displays an icon in the My Computer folder and in the Device Manager.
You can access the Device Manager by using the following menu sequence:
Start>Settings>Control Panel>System>Hardware>Device Manager (see Figure 19).
The system now recognizes the drive as a
Figure 19. Device Manager
9.Before you can record to
For software installation instructions, see “Chapter 4. Installing and Using Easy CD Creator 5 Basic on Windows Systems” on page 33.
Installing the Driver Without a Floppy Drive
If you do not have a floppy disk drive installed on your IBM PC compatible system, but you have access to the Internet via the same system, you can download the drivers from the TEAC website and save them on your hard disk. You can then install the drivers from the hard disk.
Download the appropriate drivers and installation instructions from the TEAC website at:
http://www.teac.com/dspd
TEAC | 19 |