Teac E24E user manual For Windows 98SE/Me/2000, Click the Next button to search for the driver

For Windows 98SE/Me/2000

Installing the PortaCD-RW Driver Using the Windows Wizard

This section explains how to install the PCMCIA driver using the Windows Add New Hardware Wizard.

For Windows 98SE/Me/2000

The installation procedure for the PCMCIA Card Driver varies depending on the version of Windows 98SE/Me/2000 installed in your computer.

To install the driver on a Windows 98SE/Me/2000 system, follow these steps:

1.Insert the PCMCIA card into the PCMCIA card slot in your laptop computer.

The other end of the card/cable should already be connected to the interface connector on the PortaCD-RW. (If not, see “Chapter 3. Connecting the PCMCIA PortaCD-RW to a Windows System” on page 23 for more information.)

The system displays the initial Add New Hardware Wizard panel (Figure 30).

Figure 30. Add New Hardware Wizard

Note: The system configuration and your dialog responses determine which panels the Wizard will display. Do not be concerned if your installation process varies slightly from the one described below—just follow the dialog instructions.

2.Click the Next button to search for the driver.

The system displays the following Add New Hardware Wizard panel (Figure 31 on page 29), asking what you would like Windows to do:

28 TEAC PortaCD-RW User’s Manual