Meridian Audio DVP1500 manual Adjusting the Dynamic Range Audio Soundtrack DVD

– DVD

DVD

Adjusting the Dynamic Range

of the Audio Soundtrack – DVD

Audio DRC stands for Audio Dynamic Range Compression. When Audio DRC is on, soft sounds such as dialog can be heard more clearly without making loud sounds even louder. When Audio DRC is set to [Off], there is no effect on the audio source.

Make changes to the [Audio DRC] setting in the Setup screen Audio 1 menu.

Audio1	A2 Video1 V2	Language General
	Audio DRC	— Off
	Dolby Digital Out	On
	DTS Out	— Off
	96kHz PCM Out	— 96kHz	48kHz
	MPEG Out — MPEG		PCM
Dynamic playback at low volume
	Move		SETUP	Exit

Settings: Off*

On

*Factory setting

Notes

•Audio DRC is only effective with Dolby Digital audio sources.

•If you have set the player to convert Dolby Digital audio to PCM, also make sure that you set the [Digital Out] to [On] to hear the Audio DRC effect.

•The effect of Audio DRC depends on your speakers and AV amplifier settings.

NOTICE:

THE DIGITAL AUDIO SETTINGS

HAVE BEEN OPTIMIZED BY

FAROUDJA FOR THE NRS-DCS.

DO NOT CHANGE

THESE SETTINGS.

Setting the Digital Audio Output To Be Compatible with Your AV Component

This player is capable of digital audio output for Dolby Digital, DTS, MPEG, and signals with a sampling rate of 96 kHz. Make settings in the Setup screen Audio 1 menu to reflect the capabilities of the components that you have made digital connections to.

Notes

•If you have already completed the Setup Navigator screen operations, the settings on this page have already been set by the player.

•If you have made only stereo line connections (analog) using the supplied audio cord, it is not necessary to make any changes in this menu.

Dolby Digital Out

This player is capable of outputting the Dolby Digital surround sound audio signal. When the player is connected to an AV component that has a built-in Dolby Digital decoder, select [Dolby Digital]. This player can also convert the Dolby Digital signal to a digital Linear PCM signal, the same digital signal output from a CD. Select [Dolby Digital PCM] when you have made connections to an amplifier or receiver with a Dolby Pro Logic decoder or a Digital Analog Converter (DAC).

Audio1	A2	Video1	V2	Language		General
		Audio DRC		— Off
	Dolby Digital Out			Dolby Digital
		DTS Out		Dolby Digital PCM
	96kHz PCM Out			— 96kHz	48kHz
		MPEG Out — MPEG			PCM
Change Dolby Digital output mode
	Move					SETUP Exit

Settings: Dolby Digital*

Dolby Digital PCM

*Factory setting

22