Sony MAV-555 user manual Reference, Setup Menu

Page 14

Reference . . .

17.SETUP MENU

Press [MENU]. The MENU indicator will turn on.

Turn the Wheel to select item to change.

Press [MENU] OR use the Softkeys to change the desired mode for that option.

Turn the Wheel at anytime to select another item.

Press [ESC] at anytime to exit SETUP MENU. The MENU indicator will turn off.

MENU MODES

 

(Turning Wheel Clockwise)

 

 

 

 

 

 

RECORD

Press [MENU] to select the desired record mode: Lockout, Crash (Full).

 

 

 

 

 

WIND MODE

Press Softkey to select:

 

 

 

 

HOLD (Fast wind is maintained only while key is depressed.)

 

OR

 

 

 

 

LATCH (Fast wind is initiated and maintained with momentary key press.)

 

Select fast wind speed (3.9 to 23.7) by pressing Softkey below SPD.

 

 

 

 

 

SLOMO

ST300 display shows:

 

 

 

SLOMO with:

WHEEL

 

 

(Non T-Bar version)

 

 

 

 

 

 

 

SpdRange

Preset

 

 

 

 

 

 

 

 

 

 

 

 

ST300 display shows:

SLOMO with:

TBAR

 

 

(T-Bar version)

Wheel SpdRange

Preset

 

 

 

 

 

 

 

 

 

NOTE - The T-BAR has a fixed speed range of 0 Æ +200 with a detent at +100% play speed.

Press Softkey [TBAR] (or [WHEEL]) to toggle between them.

For Wheel only:

Press Softkey [SPDRANGE] to select SLOMO speed ranges.

Press Softkey to select: 0 Æ +200 OR -100 Æ +200.

Press Softkey [BACK] to return to SLOMO MENU.

Press [ESC] to exit OR turn the Wheel to select another item.

For Wheel only:

Press Softkey [PRSET] to select the SLOMO Preset Speed Mode.

Press Softkey [UPDATE]. When exiting SLOMO mode, the last used speed is saved in the Preset Speed register.

Press Softkey [STATIC]. The Preset Speed register is NOT updated when exiting SLOMO mode. It is only changed by [SHIFT] + [SLOMO] (PRESET SLOMO).

14 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option

Image 14
Contents Model No CL-MAV-PBIO 4000CL-MAV-T-PBIO Sony DP ProtocolTable of Contents Revision History Getting Started System DescriptionST300-S/SM, VTR/DDR Controller System InstallationProduction Switcher Connection Diagram Learn on the ST300 Video Server SetupLoad a Clip Recall on the ST300 Learn on the Production SwitcherRecall on the Production Switcher Pbio ENABLE/DISABLE Triggers from the Production SwitcherLoop a Clip Advanced FeaturesCreate NEW Clips Marking the in OUT Point Setting the in OUT PointTrim Clips Viewing the in OUT PointView Contents of CUE Point Transferring CuelistTo Receive CUE Points from the PC Receive Cuelist FunctionTo Receive CUE Points from the ST300 Setup Menu ReferenceSwitcher Type ST300 SetupRecall Mode DisplayFunction Table Specifications ST300GPI IN/OUT Connector KEY Layout DNF Controls Limited Warranty USA