Sony MAV-555 user manual Function Table

18. FUNCTION TABLE

Function	Key Press	Description
GOTO ENTERED	[SHIFT] + [RECUE]	Search the VTR to the manually entered time.
TIME		Use the ST300 numeric keypad.
		Press [ENTER] or [RECUE].
FFWD	[FFWD]	Press and HOLD to shuttle. Release key to stop. Set WIND
		Speed in MENU.
JOG	[JOG]	Select JOG mode and enable Wheel.
LAST CUE	[LAST CUE]	Step to the previous Cue Point Location.
NEXT CUE	[NEXT CUE]	Step to the next Cue Point Location.
RECORD	[REC]	Places VTR into the Record mode selected by RECORD
		MODE in the SETUP MENU.
		Press [RECORD] or [RECORD] + [PLAY].
REWIND	[RWD]	Press and HOLD to shuttle. Release key to stop. Set WIND
		Speed in MENU.
SHUTTLE	[SHUTTLE]	Select SHUTTLE mode and enable Wheel.
SLOMO	[SLOMO]	Press [SLOMO] to slo-mo the VTR. Turn the Wheel (or move
		the T-Bar if available) to change the play speed. Press
		SLOMO] to STILL frame.
		OR
		Press any transport key to exit SLOMO.
SLO-MO SPEED	[SHIFT] + [SLOMO]	For WHEEL ONLY: Press [SHIFT] + [SLOMO] to preset the
PRESET		slo-mo speed. Turn the Wheel to select desired speed. Press
		[ESC] or any transport key to exit.
STOP	[STOP]	Press once to STILL frame VTR.
		Press again to put VTR into STOP mode.
GANG VTRs	[SHIFT] + [VTR #1]	Press and Hold [SHIFT]. Then when lights go out, press VTR
	OR	keys to include in the gang. Press [SHIFT] to escape gang
	[SHIFT] + [VTR #2]	setup mode. Flashing LED indicates VTR or HDD being
	OR	monitored for status.
	[SHIFT] + [VTR #3]
	OR
	[SHIFT] + [VTR #4]
TIME MODE	[TIME MODE]	Press to toggle between Timecode (TC), VITC (VT) or Tape
SELECT		Timer (TM) display modes.
LOOP CLIP	[LOOP ENABLE]	Press to loop a clip.

16 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option