Table of Contents
1. | REVISION HISTORY | 3 |
GETTING STARTED . . . | 4 | |
2. | SYSTEM DESCRIPTION | 4 |
FEATURES | 4 | |
DEFINITIONS | 4 | |
1. | SYSTEM INSTALLATION | 5 |
a. | 5 | |
b. | PRODUCTION SWITCHER | 5 |
2. | VIDEO SERVER SETUP | 7 |
3. | LOAD A CLIP | 7 |
4. | LEARN ON THE ST300 | 7 |
7. | LEARN ON THE PRODUCTION SWITCHER | 8 |
8. | RECALL ON THE ST300 | 8 |
9. | RECALL ON THE PRODUCTION SWITCHER | 8 |
10. | PBIO ENABLE/DISABLE | 9 |
11. | TRIGGERS FROM THE PRODUCTION SWITCHER | 9 |
ADVANCED FEATURES . . . | 10 | |
11. | CREATE NEW CLIPS | 10 |
12. | LOOP A CLIP | 10 |
13. | SETTING THE IN (OUT) POINT | 11 |
a. | MARKING THE IN (OUT) POINT | 11 |
b. | VIEWING THE IN (OUT) POINT | 11 |
c. | CLEARING AN IN (OUT) POINT | 11 |
14. | TRIM CLIPS | 11 |
15. | VIEW CONTENTS OF CUE POINT | 12 |
16. | TRANSFERRING CUELIST | 12 |
a. | TRANSMIT CUE LIST FUNCTION | 12 |
b. | RECEIVE CUELIST FUNCTION | 13 |
REFERENCE . . . | 14 | |
17. | SETUP MENU | 14 |
18. | FUNCTION TABLE | 16 |
19. | SPECIFICATIONS | 17 |
ST300 17 |
| |
20. | KEY LAYOUT | 19 |
21. | DNF CONTROLS LIMITED WARRANTY | 20 |
Manual Version | 3.6 080604 |
Document No.....….........
2