Sony MAV-555 user manual Getting Started, System Description

Page 4

Getting Started . . .

2.SYSTEM DESCRIPTION

‰NOW, production switchers can load & play video clips on Sony MAV DDRs.

‰Use the EMEM or SNAPSHOT Learn & Recall functions of the production switcher to load and play a video clip from a Recall or timeline.

‰Use the Run and Trigger functions of the production switcher to Play, Stop or Recue the video clip.

‰Instantly load a video clip at the press of a button.

‰Instantly load a FILL clip & KEY clip at the press of ONE button, then play out both channels in sync. LOOP up to 4 channels.

‰Control up to 4 video channels individually or ganged.

FEATURES

The 4000CL-MAV-PBIO, 400 Clip Instant Access System consists of the ST300-SSM with Cliplist software.

With this Option, the ST300 has 4 Peripheral Device Addresses, one for each VTR that it controls. This allows the production switcher to control any and all VTRs connected to the ST300.

Upon receipt of the Learn command from the production switcher, the ST300 saves the CLIP IDs of the currently loaded clips, the current time of each clip, the VTRs they are loaded on, and the current GANG mode, into the appropriate Cue Point.

When the Recall command is received, the ST300 loads the “Learned” Clips onto the “Learned” VTRs, cues the Clip to the “Learned” time, then restores the “Learned” GANG mode.

The Trigger function on the production switcher puts the selected VTRs into Play, Stop, Recue or other available modes.

DEFINITIONS

‰Throughout this document, “Video Server” refers to the MAV-555.

‰The ST300-S/SM as the ST300.

‰Words surrounded by brackets, for example, [ENTER], are keys on the ST300. [XXX] + [XXX] means hold the two keys down simultaneously.

‰“Softkeys” are the row of keys directly below the display that perform multiple functions in MENU and other modes.

4 4000CL-MAV, 250 Clip Fast Access System, for Sony MAV-555, with PBIO option

Image 4
Contents Model No CL-MAV-PBIO 4000CL-MAV-T-PBIO Sony DP ProtocolTable of Contents Revision History Getting Started System DescriptionProduction Switcher System InstallationST300-S/SM, VTR/DDR Controller Connection Diagram Load a Clip Video Server SetupLearn on the ST300 Recall on the Production Switcher Learn on the Production SwitcherRecall on the ST300 Pbio ENABLE/DISABLE Triggers from the Production SwitcherCreate NEW Clips Advanced FeaturesLoop a Clip Setting the in OUT Point Trim ClipsMarking the in OUT Point Viewing the in OUT PointView Contents of CUE Point Transferring CuelistTo Receive CUE Points from the ST300 Receive Cuelist FunctionTo Receive CUE Points from the PC Setup Menu ReferenceST300 Setup Recall ModeSwitcher Type DisplayFunction Table Specifications ST300GPI IN/OUT Connector KEY Layout DNF Controls Limited Warranty USA