If you need to remove the bricks (to lighten the fi replace for ease of installation, replacement, etc), follow this sequence:
4For Firebrick Removal: Remove the ashwell grate. This allows the four bottom bricks to be removed fi rst.
Slide out the baffl e support bracket from above the front tube.
Reaching above the top fi rebricks and baffl es, lift and tape the bot- tom fl ame spreader to the top spreader to ease top brick and baffl e removal and to avoid damaging the fi bre baffl e. Remove the three front tubes.
Remove the top fi rebrick on the right, then the left firebrick. Remove the baffl es, starting with the right side.
Remove the gasket rope. Check the rope for deterioration and replace if necessary. Remove the rear bricks (pull the two bricks forward at the centre, and lift the bottom of the bricks out). Remove the side bricks (tilt the tops inward).
15
FIGURE 31
GASKET
TOP FLAME SPREADER
BOTTOM FLAME SPREADER
FIBRE BAFFLES
TOP FIBREBRICKS
BAFFLE SUPPORT 
TUBE BURNERS 
GASKET
LEFT SIDE FIBREBRICK | REAR FIBREBRICKS RIGHT SIDE FIBREBRICK |
BOTTOM LEFT FIBREBRICK | BOTTOM RIGHT FIBREBRICK |
LEFT FRONT FIBREBRICK
RIGHT FRONT FIBREBRICK
NorthlineExpress.com | http://www.northlineexpress.com |