Intel 05-2352-005 manual Description, Issues Resolved in HMP

Description

A summary description of the issue. For non-resolved issues, a workaround is included when available.

Table 1. Issues Resolved in HMP 1.2

Defect	PTR	SU	Product or	Description
Number	Number	No.	Component
IPY00033948	--	18	HMP	dlstop does not stop all Dialogic processes if the user’s
				default shell is csh.
IPY00033758	--	18	HMP	teeloger process is created each time ct_intel restart is
				executed.
IPY00032236	36062	18	Kernel	Kernel fails with a QVERIFY FAILED in lbrac.c 220 after
				approximately 25 days.
IPY00032235	36405	18	Kernel	Kernel fails with a qerror_killtask AND ERROR CODE
				0X41107 after approximately 25 days.
IPY00031503	36781	18	HMP	Changing the ethernet interface name from the default of
				ethX produces an error (e.g., “Kernel failed to interpret the
				license key, boardNumber=1, processor=CP”) on Dialogic
				system services start up.
IPY00032236	36062	14	Kernel	Kernel fails with a QVERIFY FAILED on the lbrac.c file
				after approximately 25 days.
IPY00032235	36405	14	Kernel	Kernel fails with a QERROR_KILLTASK and error code
				0x41107 after approximately 25 days.
IPY00023802	36484	14	IP Host	Multiple channels sending RTP data to a same IP address
				and same RTP port cause the channels to hang.
IPY00009054	34875	9	HMP	Because the maximum number of instances in the PCD
				file was set too low, a killtask (and eventually a blue
				screen) occured when trying to download the 240R-240V-
				120E-240C-240S-64F SKU.
IPY00010596	34758	9	HMP	The free default single channel SKU should be
				1r1v0e0c0s0f_ver.xml, not 1r1v1e1c1s1f_ver.xml.
IPY00009813	34638	9	Voice	Adding a tone using the dx_addtone( ) function, followed
				by the dx_distone( ) function on a high density channels (
				for example, 240) results in some tones failing.
IPY00030253	34363	9	Voice	HMP conferencing uses a phase reversal algorithm to
				improve audio quality in conferencing. However, typical
				PESQ tests do not recognize this and report low PESQ. A
				parameter has been added that allows the phase reversal
				algorithm to be disabled so PESQ tests will not fail.
IPY00001238	34148	6	HMP	The function dx_open() takes up to 10 seconds to
				complete when running as non-root user. The function
				returns successful after those 10 seconds.
				When running as root, there is no such delay.
IPY00030251	33919	6	HMP	Upon running different consecutive runs of the same
				application, hmpperf, in different configurations, the 90th
				run always fails.

HMP Linux 1.2 Release Update, Rev 05 — September 2006 15