•In Section 4.1, “Starting the Demo” of Chapter 4, “Running the Demo”, the information in the Linux subsection should read:
The executable is located in:
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/Release/
Run the executable from this location by typing: ./IPMediaServer
•In Section 5.1.1, “Demo Source Code Files”, of Chapter 5, “Demo Details”, the path for Linux to the demo source code files in Table 3 should be:
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer
and the path for Linux to the demo source code files in Table 4 should be:
$(INTEL_DIALOGIC_DIR)/demos/IPMediaServer/Modules
•In Section 5.1.2, “PDL Files”, of Chapter 5, “Demo Details”, the path for Linux to the PDL files in Table 5 should be:
$(INTEL_DIALOGIC_DIR)/demos/Shared/pdl_Linux
3.5.4Global Call API Demo Guide
The Global Call API Demo is designed to run using a series of four or fewer contiguous channels. The highest channel number in the series must be 120 or lower. Attempts to run the demo using a channel number higher than 120 will cause the demo to fail. (IPY00009701 = PTR 34019)
For Linux, the Global Call API Demo is located in:
$(INTEL_DIALOGIC_DIR)/demos/gc_basic_call_model/
The demo is started by executing the following command:
gc_basic_call_model
HMP Linux 1.2 Release Update, Rev 05 — September 2006September 2006 | 44 |