3.5Demonstration Software Documentation
This section contains updates to the following documents:
•Audio Conferencing API for Host Media Processing Demo Guide
•Continuous Speech Processing API for Host Media Processing Demo Guide
•IP Media Server for Host Media Processing Demo Guide
•Global Call API Demo Guide
3.5.1Audio Conferencing API for Host Media Processing Demo Guide
The Audio Conferencing API for HMP Demo is designed to run using a series of four or fewer contiguous channels. The highest channel number in the series must be 120 or lower. Attempts to run the demo using a channel number higher than 120 will cause the demo to fail.
(IPY00009701 = PTR 34019)
In Section 1.1, “Overview” of Chapter 1, “Demo Description”, for Linux, the Audio Conferencing API for HMP Demo is located in:
$(INTEL_DIALOGIC_DIR)/demos/Conferencing/ConferencingDemo/Release/
In Section 1.2, “Features” of Chapter 1, “Demo Description”, the following Call Control feature is not demonstrated by the demo:
•RAS (Gatekeeper) support via the Global Call API (IPY00009238 = PTR 33768)
In Section 2.1,”Hardware Requirements” of Chapter 2, “System Requirements”, the first bullet in the Requirements for Linux should read:
•Machine using the Red Hat Enterprise Linux Advanced Server 3.0, Update 1 operating system with kernel version 2.6.8.1.
In Section 4.1,”Starting the Demo” of Chapter 4, “Running the Demo”, the following changes apply:
•In Step 1, for Linux, the demo is started by executing the following command:
./ConferencingDemo
•Step 2 of the procedure should read: “Make an IP call into the system using two IP endpoints”.
HMP Linux 1.2 Release Update, Rev 05 — September 2006September 2006 | 42 |