Intel 05-2352-005 manual HMP Linux 1.2 Release Update, Rev 05 September 2006September

country_code

The country code. Range: 0 to 255; any value x>255 is treated as x%256.

extension

The extension number. Range: 0 to 255; any value x>255 is treated as x%256.

manufacturer_code

The manufacturer code. Range: 0 to 65535; any value x>65535 is treated as x%65636.

•In Section 4.16, Registration, on page 113, the fourth bullet item in the second list [“Once an application is registered, if it wishes to handle calls without the registration protocol (that is, return to the same node as before registration), it can simply deregister.”] is incorrect and should be ignored.

•In Section 7.2.26, gc_Start() Variances for IP, the note following the #define IP_CFG_MAX_AVAILABLE_CALLS applies to both HMP Windows and Linux versions, and should read:

Note: Do not use IP_CFG_MAX_AVAILABLE_CALLS with applications running on HMP, since IP_CFG_MAX_AVAILABLE _CALLS will intitialize the stack for 2016 channels. This is an inefficient use of system resources, resulting in a lengthy initialization time and substantial memory use.

•In Section 7.2.17, gc_OpenEx() Variancesfor IP, the following note should be included:

Note: Applications should avoid closing and re-opening devices multiple times. Board devices and channel devices should be opened during intialization and should remain open for the duration of the application.

HMP Linux 1.2 Release Update, Rev 05 — September 2006September 2006 33