System Menu - Preferences
Accessing the Preferences options
1Switch on the TV set. Select the correct Video In channel at the TV.
2Press
control.
➜ The system menu appears on TV.
3Press 4 to select { Preferences .}
Navigate to menu item | STOP |
Recording YesDVD Sound Disc
Preferences
[SYSTEM] = Exit
4Press 2 repeatedly to select one of the options from { Preferences } and press 4 to select a setting you want to adjust.
➜ Instructions for adjusting the settings are provided in the following pages.
5Press 2 to enter its options and use
1 2 3 4 to make your selection.
➜ If the selection in the menu is grayed out, that means the feature is not available or not possible to change at the current state.
6Press 1 to confirm.
7 To exit, press
Recording
For more information on this menu, please see pages 37~39 “Recording settings.”
Sound |
|
STOP | |
Sound |
|
Preferences |
|
Sound Mode |
|
Night Mode |
|
{Sound mode }
You can select from the following settings how sound will be played back by devices connected to the analog outputs (L/R AUDIO OUT.)
–{ Stereo } :To hear sound from the left and right audio channels. Use this setting when the DVD recorder is connected to a stereo TV.
–{ Surround } : For audio device that is compatible with Dolby Surround. Dolby Digital and
{Night mode }
Allows you to optimize the sound dynamics at low volume. This causes less disturbance in quiet environments. This setting only functions with Dolby Digital Audio on DVDs.
–{ On } : Select this to level out the volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.
–{ Off } : Select this when you want to enjoy the surround sound with its full dynamic range.
English
TIPS: Underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press
53
MRV660_17_Eng40 | 53 | 9/3/05, 10:26 AM | 3139 246 XXXXX |
|