10/100: The Network Speed LED will be either solid amber, or solid green. Amber indicates the LAN1 front channel network speed is 10 Mbps. Green indicates the LAN1 front channel network speed is 100 Mbps. When the LED is red, there is no network link visible to the server on LAN1.
Drive: The Drive Activity LED lights up whenever data is moving to or from an IDE device or SCSI device. A flashing green light indicates an attached IDE drive is reading or writing data. A flashing red light indicates a SCSI device is reading or writing data. A flashing amber light indicates both IDE and SCSI devices are active. The Drive Activity LED does not differentiate between reading and writing data.
NOTE: Only LAN1’s Network and 10/100 LED’s are only available on the LCD Display.
2.3.5 Power Supply
The
NOTE1: When selecting the ATX power adapter, do not forget to attach an ATX power switch to CN6 pin set. This has been already configured on the 19” 1U
Page 14 of 98 | All Items Are Subject To Change Without Notice | Feb. 2004 Rev 1.0 |