2.Reboot your workstation
3.Open your web browser
4.Type http://10.10.10.10 (remember, that’s
NOTE: After you have finished configuring the
Now that you have a way of accessing the
2.4.3. Step 2: Using the VR-N100U Web Browser
From any workstation running any operating system on the same segment as
Admin Name and Password
You will be challenged to authenticate your identity as the
Setup Wizard
The first screen to appear is the Setup Wizard. If you already have a plan in place for your
However, if you don’t want to be distracted by having to deal with setting these options at this time, it is not a problem. All the options you see here can easily be set and changed at any time using the utilities in the Administration Toolbox.
If you are just not sure, you can pop ahead to the beginning of 3.
1.Regardless of what you eventually decide to do here, when you have finished doing it, click on the Next button.
2.You will be presented with the Networks Information Screen and will have three available settings options to choose from, View Network Settings, Change the Static IP Setting, or View/Change DHCP Settings.
Page 19 of 98 | All Items Are Subject To Change Without Notice | Feb. 2004 Rev 1.0 |