VR-N100U USERS MANUAL
Reflash Firmware on Zerver…
This icon allows the administrator to update the VR-N100U firmware by reflashing the firmware on the security appliance. This will open up the VR-N100U List dialog box from which you drag-and-drop the VR- N100U which you wish to reflah onto the main VDRView page. It will then prompt you to log in and open up the Reflash page that will take you to the web browser under the Networks utility page. Refer to section
4.7.7Reflash for more details.
View Large Icons
This icon will display all discovered VR-N100U security appliances under Zerver Center as large graphical icons.
View Small Icons
This icon will display all discovered VR-N100U security appliances under Zerver Center as small graphical icons.
View List
This icon will display names of all discovered VR-N100U security appliances under Zerver Center.
View Details
This icon will display a detailed list of all discovered VR-N100U security appliances under Zerver Center that includes the VR-N100U name, type, IP address, how the VR-N100U was acquired, default name, discovery method, and login status.
Edit Remote VR-N100U List…
This icon will open up the Remote Server List window. This will allow the ability to store and activate any VR-N100U security appliances outside of your current network segment by referencing its IP address or server name. Once the VR-N100U have been added, you can then proceed to securely log into them over SSL. Refer to section 4.6.5 Options – Edit Remote Zerver List for more details.
Communication Settings…
VDRView offers the ability to determine the remote VDR Discover Mode and Communication Method. They can be setup as non-encrypted or encrypted based on how the VR-N100U was originally setup by the administrator. Refer to section 4.6.5 Options – Communication Setting for more details.
Page 50 of 98 | All Items Are Subject To Change Without Notice | Feb. 2004 Rev 1.0 |