1.To add or delete a remote Zerver, select Edit Remote Zerver List from the Options menu.
2.Click on the Add button to add an entry to the list. You will be prompted to provide either the name of the remote Zerver or its IP address, if it is a static IP address.
3.Once you have included all remote
4.You can also delete any of your entries by selecting and then clicking on the Delete button. You will be prompted to reconfirm or cancel the deletion.
Communication Settings…
VDRView and
NOTE: When using ENCRYPTED, everything will be secured, however, it will cause additional load on your CPU as the data and video is encrypted and then decrypted
Refresh Settings
As you view the VDRView screen, you will see it refresh at specific intervals. The Discover function continues to run in the background and searches the subnet segment or the domains defined previously, depending on whether the Discover via Microsoft Browser and Discover via Remote Server List are toggled off or on. You can enable or disable the Auto Refresh settings option and change the Refresh Check Interval parameter between 10 to 60 seconds, and then press the OK button to save the new settings.
Page 59 of 98 | All Items Are Subject To Change Without Notice | Feb. 2004 Rev 1.0 |