Fostex D824, D1624 manual Setup of the Internal Clock, Press the Setup key while in the stop mode

D824/D1624 Quick Operation Guide

Setup of the Internal Clock

This recorder contains an internal clock function.

Upon finishing format of the current drive, set internal clock to the present time by procedure explained below. Procedures below is explained on the assumption that current drive has been formatted, the program head (ABS 0) is displayed and this recorder is on standby.

<Note>

Be sure the internal clock is setup to the correct year, month, day and present time.

The year, month, day and time are important data necessary for executing the "Multiple Undo Function" explained in the Reference Manual. For details on multiple undo function, refer to the Reference Manual.

1. Press the SETUP key while in the stop mode.

The recorder will enter the SETUP mode and [Sig- nature Set?] menu will be displayed.

4. Move edit point with the SHUTTLE dial and input the number with the JOG dial.

The following numbers can be input at each edit point.

OL
0
3
6
9
12
18
24
30
42
∞
_	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

Hour	:00 ~ 23
Minute	:00 ~ 59
Day	:01 ~ 31
Month	:January ~ December
Year	:00 ~ 99

2.Rotate JOG dial to display the [Date & Time Set?] (? blinks) menu and press the

EXECUTE/YES key.

The recorder will change to display of hour, minute, second, day and month in real time setup at ship- ping the recorder from the plant (Example is De- cember 8, 14 hour, 48 minutes, 15 seconds).

																	SETUP
OL
0
3
6																	44.1kHz
9
12
18
24
30
42
∞
_	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
																	SETUP
OL
0
3
6																	44.1kHz
9
12
18
24
30
42
∞
_	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

<Note>

The "second" figures will start from 00 at the instant the following is executed (Pressing the EXECUTE/YES key). Press the EXECUTE/YES key in reference to the time announcement.

5. Press the EXECUTE/YES key.

The recorder will be set to the time/month, day that was input and continue to function as the internal clock.

6. Exit from the SETUP mode by pressing the EXIT/NO key or STOP button twice.

The recorder will change to the time base display prior to entering the SETUP mode.

3. Press the EXECUTE/YES key.

Hour, minute, second, day and month at the instant key is pressed will be held and these can be edited (Hour display will flash).

Flashing

																SETUP
OL
0
3
6																44.1kHz
9
12
18
24
30																SURE?
42
∞
_	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16

12