Fostex D824, D1624 manual Preparation for the current drive, Disassembling the removable case

Page 6

D824/D1624 Quick Operation Guide

Preparation for the current drive

This recorder has a slot for an optional hard disk. First you need to install a hard disk into the removable case included in this recorder package before you install it into the slot.

The following instructions assume that you have already purchased an E-IDE hard disk unit. Prepare the following items for hard disk installation:

Dust cover

Fixing screws

Insulation seals

Removable case

Hard disk unit

Lock-unlock key

 

<Note>

Be sure to turn off the power to the recorder (or remove the power cable from the AC outlet) before installing a hard disk.

Installing a hard disk in a removable case

First, you need to disassemble the removable case included in the package so that you can install a hard disk into it.

Disassembling the removable case

1.Apply your thumb to the edge of the case on the connector side as shown in the figure, and slightly pull the cover in the direction of the arrow.

2.Apply your thumbs to the side of the case and open the cover. In the same manner, open the cover on the other side. (Caution: Be careful not to pinch your fingers.)

<Notes on handling a hard disk>

•A hard disk is a high-precision device. Do not apply any impact to the disk when and after you install it in the case. Do not leave the disk near a device that generates a strong magnetic field. Choose a level and stable surface for installation. Be careful not to injure yourself.

Fostex is not liable for any malfunction or damage to the hard disk caused by mishandling.

•You need to set the DIP (Jumper) switch on the hard disk to “MASTER” before you install it into the removable case. If the switch is set to “SLAVE,” the hard disk will not function correctly.

Refer to the instruction manual that came with your hard disk for more information on the DIP (Jumper) switch setting.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Quick Operation Guide Track Digital RecorderAbout this manual Safety Instructions Recording media DamagesCopyrights Contents Package contents Recording mediaPreparation for the current drive Disassembling the removable caseConnecting cables Fixing the hard disk to the caseAssembling the case Installing the removable case in the recorder Connecting a detachable controllerModel 8551 Optional extension cable Turn the power on Press the EXECUTE/YES keyPress the EXECUTE/YES key again Press the EXECUTE/YES while holding down the Record button Press the EXIT/NO key or the Stop buttonProgram Time BaseSetup of the Internal Clock Press the Setup key while in the stop modeEXECUTE/YES key Connecting a analog mixer Connections when using the D824Hints Connections when using the D1624 HintsConnecting a digital mixer Connections when using the D1624Initial settings Basic recordingAbout Sampling Frequency Basic analog recording Undo and redo recording single undo/redo UNDO/REDO keySelecting Digital Out Basic digital recordingSelecting Digital About Digital In selectionSetting the reference clock About reference clock settingInt Auto Word Video Multitrack recording using overdubbing Ping-pong recordingMixdown Recording in a new ProgramLocating the top of the Program Basic Locate functionSelecting the desired Program from multiple Programs Locating the end of the recorded area of the ProgramPlayback using the Vari-pitch function Vari-pitch function proceduresReference manual refernece pages PrecautionsSetup mode Reference pagesDeclaration of EC Directive Fostex Distributors List In EuropeAffect of Immunity on This Equipment Memo Fostex Corporation
Top Page Image Contents