FujiFilm Yakumo DVD Travelle manual PAL-NTSC Selection, Disc loading

YAKUMO DVD TRAVELLER 8.0 ENGLISH

BASIC OPERATIONS

PAL-NTSC Selection

To set up the MULTIMEDIA PLAYER according to the connected TV-set or TFT LCD monitor and video signal system, to play a DVD or any other video discs, follow these guidelines:

zIf your TV-set is NTSC, press the N/P button on the Remote Control until you see NTSC on your screen.

zIf your TV-set is PAL, select PAL by pressing the N/P button on the Remote Contro until you see PAL on your screen:

zIf your TV-set supports both PAL and NTSC, select MULTI by pressing the N/P button until you see MULTI on your screen.

Disc loading

•Load one disc with the label side facing upwards and make sure you do not touch the data side with your fingers.

•Slide the OPEN button on the MULTIMEDIA PLAYER to the left to open the lid for loading or unloading a disc.3

Note:

● Do not touch the content side of a disc

● Do not stick any paper or stickers on a disc.

● Do not force the disc in place, it is possible you damage the disc or the unit itself, if a disc is not placed correctly on the guides in the disc tray.

● Use only the OPEN slide switch to open the lid, do not use any other sharp objects, such as screwdrivers, to force the lid open.

OPEN

●Finger prints and dust on the disc surface can affect the sound and picture quality. Clean the discs regularly with a soft cotton cloth from the disc center to the outside of the disc. Do not clean in circular motions.

●Do not use any kind of solvent, such as diluting agent, gasoline, liquid detergent, and gasoline liquid detergent antistatic aerosol used for vinyl, this may cause serious disc damage.

●Keep discs away from direct sunlight or any heat source

●The MULTIMEDIA PLAYER is a precision device. If the optical pick-up lens and disc drive parts become dirty or worn down, picture quality will become poor. To obtain a clear picture, regular inspection and maintenance are recommended every 1,000 hours of use, depending on the operating environment.

●Zanon is not responsible for damage that may occur to any disc that is operated in this unit or not handled, cleaned, or stored as suggested above.

Once the disc is loaded, the unit will automatically start reading the disk and it will take a few seconds to download the disc initial data, thereafter the disc type will be displayed in the left upper corner of the screen and the unit will start playing the disc.

Page 11 of 35 pages