YAKUMO | DVD TRAVELLER 8.0 | ENGLISH |
|
|
|
Press ENTER to enter the Analog Audio setup page. The page hereunder will be shown:
Set sound mix output mode:
- press the RIGHT arrow to enter the sub- menu. If you want analog stereo signals, set the sound mode to “STEREO”, press
the DOWN arrow once to move the selection to “STEREO”, than press ENTER.
-If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect via the R/L connectors), select “LT/RT”, then press ENTER.
You can select one of these modes to adjust the Bass and Treble signal to your best liking. ON will switch the selected mode on and OFF will switch it back to normal Audio playback. Note: Please be advised that sometimes the BASS on an Audio CD or DVD is already very low, using the Bass Boost or Super Bass can overload your speakers resulting in poor sound quality.
EQAULIZER Select this menu item to set up your preferred Equalizer mode. Press ENTER to enter this selection.
You can select one of these preset Equalizer modes to adjust the audio signal to your best liking.