If the VisualServer works in variation or low bandwidth (comparing with video bandwidth) environment, the client side will receive the poor quality of media. For improving this situation, you can check the “Improve audio quality in low bandwidth environment” item. It can make the audio quality better, but the media delay is longer and
After everything is set, click on 
. A warning message will pop up. Click on 
to confirm. VisualServer will automatically restart. If "Reset network at next boot" is kept checked, run the installer procedure again. Otherwise VisualServer will restart automatically.
Administrators should notice that the IP address, subnet mask, default router and DNS servers will be cleared when the network interface is switched to the other. Refer to the related section of Ethernet or
49
www.vivotek.com