Timer Recording
5The decoded information appears after
confirmation. You can go back at any time to change the information by pressing [ENTER]. Select the appropriate input field using [É ]. If required, change the information using
[É ].
If all the information is correct, press the [ENTER] button. The programming information is stored in a TIMER block.
Timer Recording
PR No. Date Start | End Mode | ||||
02/01 13:30 14:30 HQ |
| ||||
|
| ||||
| |||||
|
|
| |||
|
| Media |
|
|
|
|
| ||||
| PR No. | ||||
|
| ||||
| Date | 02/Jan Sun | |||
|
| ||||
| Start | 13:30 | |||
|
| ||||
|
| End |
| 14:30 | |
Instructions: |
|
|
| ||
Move É HQ | |||||
|
| Repeat |
| Once | |
|
| Delete |
|
|
|
|
| Instructions: |
|
|
|
6Press [SETUP] to exit the Timer Record List.
7Timer indicator will light or start blinking. You must power off the HDD/DVD Recorder to start the Timer Recording.
VideoPlus is not available for some countries.
Canceling a Timer Recording
You can clear a Timer Recording any time before the recording actually starts.
•Use [É ] to select the program you want to erase on the Timer Recorder List, then press [ENTER] to modify it. Use [Ï Ã] to select 'Delete' then press [ENTER].
Or just press [CLEAR] on the Timer Recorder List.
Timer Recording Troubleshooting
Even if a Timer Recording is set, the HDD/DVD
Recorder will not record if:
•No disc is loaded.
•A
•‘Lock Disc’ is set to ON in the DISC Settings menu; see page 54.
•There are already 49 titles recorded on the disc or 254 titles recorded on the HDD.
You cannot enter a Timer Recording if:
•A recording (dubbing, copying) or playing titles is already under way.
•The start time has already passed.
•Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
•The earlier program takes priority.
•When the earlier program finishes, the later program starts.
•If two programs are set to start at exactly the same time, the program entered first takes priority.
Confirmation is not possible when:
•The DISC Lock setting is set to ON.
•There are already 49 titles recorded on the disc or 254 titles recorded on the HDD.
If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.
Recording Priority
•Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual recording. During manual recording, Timer Recording or OTR will be ignored.
The cooling fan continues to work when a Timer recording is set and VPS/PDC is turned ON, because the HDD/DVD Recorder has to get time data from the station.
Stopping a Timer Recording in Progress
After a Timer Recording has started, you can still cancel the program by pressing and holding [STOP] for 5 seconds.
44