Daewoo DHR-9105P user manual Connecting an Amplifier/Receiver, Component Video Connection

Page 17

DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘ ` 16 mac001 1200DPI 100LPI

Connections

S-Video Connection

1Connect the S-VIDEO OUT jack on the HDD/DVD Recorder to the S-Video in jack on your TV using an S-Video cable (S).

2Connect the Left and Right AUDIO OUT jacks from the HDD/DVD Recorder to the left/right audio in jacks on your TV using the audio cables.

1Connect the HDD/DVD Recorder’s DIGITAL AUDIO OUT jack (Coaxial or Optical) to the corresponding in jack on your amplifier. Use an optional digital coaxial (or optical) audio cable.

(X)

2You will need to activate the HDD/DVD Recorder’s digital output; see ‘Audio’ Settings on page 25.

Component Video Connection

•If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the HDD/DVD Recorder’s Progressive Scan output for the highest video resolution possible.

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled.

1Connect the COMPONENT VIDEO OUT jacks on the HDD/DVD Recorder to the corresponding in jacks on your TV using a Y Pb Pr cable (C) if the component (Y, Pb, Pr) is available on your TV.

2Connect the Left and Right AUDIO OUT jacks from the HDD/DVD Recorder to the left/right audio in jacks on your TV using the audio cables.

•Be sure to set the HDD/DVD Recorder to Progressive Scan mode by pressing and holding [P.SCAN] for 5 seconds (or changing the ‘Video Output’ in the Setup Menu; see page 24).

•Progressive Scan does not work with the RF, Audio/Video or S-Video connections.

Connecting an Amplifier/Receiver

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic

Connect the Left and Right AUDIO OUT jacks on the HDD/DVD Recorder to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A).

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

Digital Multi-Channel Sound?

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel audio/video receiver that supports one or more of the audio formats provided by your HDD/DVD Recorder (MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver.

•Due to the DTS Licensing agreement, the digital output will be in DTS digital out when the DTS audio stream is selected.

•If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

•5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped with a digital multi- channel decoder.

•To see the audio format of the current DVD on the on-screen display, press [AUDIO].

The HDD/DVD Recorder does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multi-channel surround, you must connect the HDD/DVD Recorder to a DTS compatible receiver via one of the HDD/DVD Recorder’s digital audio outputs.

Rear of HDD/DVD Recorder

 

X

A

 

OPTICAL

COAXIAL

L

R

DIGITAL INPUT

DIGITAL INPUT

AUDIO INPUT

16

Amplifier (Receiver)

Page 16 Page 18
Image 17
Page 16 Page 18
Contents HDD/DVD Recorderr r For your own Safety Safetyty InstructionsI t tiPrecautions Avoid direct exposure to beam Important SafeguardsCombination to overturn All operating and use instructions should be followedUneven surfaces may Product Weee Waste of electrical and electronic equipmentTable of Contents Overviewi About SymbolsOverview Regional codeDisc-related Terms Dual MediaAbout DVD Recording What is DV?Recording TV Audio Channels Restrictions on Video RecordingPrecautions Front Panel Identification of ControlsFront Panel Display Selects DV Input mode Remote ControlSelects HDD mode Displays a disc’s Title menu, if available Interlace Scan modeConnect to a TV with an RF input Rear panelConnect to a TV with Component Video Y Pb Pr inputs Connecting Antenna/Cable Connecting a TVConnectionsti RF ConnectionVideo Connection Connecting an Amplifier/ReceiverComponent Video Connection Digital Multi-Channel Sound?Connecting Optional Equipment Installation Initial InstallationCzechInstallation Set ClockSetup Menu Overview Setup menuInstallation Settings Menu NavigationSelect ‘Fine Tune’. You can adjust the fine tuning Setup menuSet Clock Auto SetPreparation Set ClockAdjust Channels Recording Options SettingsAdjust Channels DVD Record QualityHDD Record Quality Language SettingsOSD Language Auto ChapterVideo Output Preferences / Video SettingsTV Aspect Ratio PreferencesDigital Output Preferences / Audio SettingsDynamic Range Virtual SurroundPreferences / Parental Controls Set the new password to something other thanSet Parental Level Parental ControlParental Country Code Change PasswordSelect ‘Parental Country Code‘ Parental Country CodeAuto Settings Preferences / Auto SettingsSet Hdd Parental Lock Auto Clock SetPreferences / Hard Disk Buffer ModeAuto Title Delete HDD PreferencesJump To Interval Reset Hard DiskPreserve RefreshSystem Info Restore DefaultsSystem Information Displaying Disc Information On-Screen Displayi l OverviewiMono Audio Signal Mono BIL Audio SignalChanging the TV Audio Channel Changing TV ChannelsFast Forward/Backward Still Picture and Frame-by-Frame PlaybackSlow Motion Changing the Audio LanguageSearch RepeatSelecting Titles Selecting ChaptersPlayingl i a Picture,i , Musicic or DivXi filesil Playable resolution is from Min X100 to maxDivX Playback HDD Media, DVD File size of the DivX subtitle is limited to 128KBAudio CD Playback Desired folder using É and press EnterMP3 Playback HDD Media, DVD Playback will stop at the end of the mediaDVD Pictures Playing MP3 Files During a Slide ShowHDD/DVD Recorder can playback up to 1000 files per disc Navigation in Time Shifting mode Time shifting in HDD modeTimei shiftingi ti & Savingi Press Stop to return to the live broadcastSaving to HDD Other Operations in TIme shifting saving modeSave Stop againOne Touch Record OTR Basicic RecordingiRecording to DVD or HDD Timer Recording using Manual Set Record Screen Timer RecordingTo Pause the Recording Playing under recordingEdit Timer Enter the necessary information for your Timer RecordingsSelect ‘VideoPlus’ with É/ and confirm with Enter Press Enter to confirmStopping a Timer Recording in Progress Canceling a Timer RecordingTimer Recording Troubleshooting Recording from a Digital Camcorder Recording from an External InputPress REC once to start recording Press DV to select the DV inputDubbing Select HDD to DVD using É and press EnterDubbing from HDD to DVD Press DUB, then Media Dubbing appearsMedia files Copying Select DVD to HDD using É and press EnterDubbing from DVD to HDD Copying and Editing media file DVD, HDDSelect the media you want to copy to and press Enter Select Copy‘ using É and press ENTER. Or just press DUBOpen Open the media and folder you want to copy to DivX copy works only in Divx modelDeleting a HDD title HDD Playback and EditingPlaying a HDD title Renaming Labeling a Title Editing a HDD titleParental Lock Protecting a TitleEditing a Title Dubbing a HDD title to DVD disc Sorting a HDD titleDisci Manager At first, go to ‘Disc Menu’ modeDisc Editing in DVD±RW disc Disc InformationDVD±R discs cannot be locked unlocked or erased Lock/Unlock Disc DVD±RWMake Compatible Finalise Disc Editing in DVD±R, DVD-RW discTitle Editing At first, go to ‘Title Edit’ modePlay a Title Change NameTitles and Chapters Advanced Disc EditingRecord Option Split Title Edit ChaptersHide Chapters Change Index PictureNo power No picture No sound TroubleshootingSymptom Cause Solution Moisture condensation can occur Moisture CondensationDVD Specifications HDD SpecificationsAccessories GeneralYour 1ST Year Manufacturerõs Guarantee Daewoo Guarantee Department
Top Page Image Contents