Daewoo DHR-9105P user manual Recording from an External Input, Recording from a Digital Camcorder

DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘ ` 45 mac001 1200DPI 100LPI

Recording from an External Input

Recording from External Components

You can record from an external component, such as a camcorder, VCR or Digital Camera, connected to any of the HDD/DVD Recorder’s external inputs.

1Make sure the component you want to record from is connected properly to the HDD/DVD Recorder; see pages 15~17.

2Use [PR+/–] or [INPUT] to select the external input to record from.

3Load a recordable disc if you are recording onto a DVD. And then select HDD or DVD to record.

When you load a new, blank recordable disc (DVD±RW, DVD±R), the recorder will take a moment to initialize it for recording.

4Set the desired Recording mode by pressing [REC SPEED] repeatedly.

Available disc (or HDD) space will be displayed by selecting recording mode.

5Press [REC (●)] once.

Recording will start. The REC indicator lights on the front panel display.

Recording continues until you press [STOP] or the disc (or HDD) is full.

To record for a fixed length of time, see ‘One Touch Record‘ on page 40.

6Press [STOP (■)] to stop recording.

•If your source is copy-protected, you will not be able to record it using the HDD/DVD Recorder. See ‘Copyright Notice‘ on page 8 for more details.

DV Input screen appears. Then, if you select 'Yes', it will be changed to DV input.

3Find the place on the camcorder tape from which you want to start recording.

For best results, pause playback at the point you want to start recording.

4Press [REC] once to start recording.

Recording is automatically paused if the HDD/DVD Recorder detects no signal. You can pause or stop the recording by pressing [PLAY/PAUSE] or [STOP].

You can select media you want to record as pressing the [DVD] or [HDD].

RECORDING

Recording from a Digital Camcorder

You can record from a digital camcorder connected to the DV IN jack on the front panel of the HDD/DVD Recorder.

1Make sure your digital camcorder is connected to the front panel DV IN jack; see page 17.

2Press [DV] to select the DV input.

DV Input

This will stop the Timeshifting

Buffer. Proceed?

Yes

No

Instructions:

Enter-Confirm Setup-Exit Move É

45