GE 28821 manual Belt Clip and Optional Headset, Connecting the Belt Clip

Memory Full

When the answering system memory is full, the system answers after 10 rings, beeps and waits for you to enter the 3-digit security code. If you don’t enter the security code within 8 seconds, the phone hangs up.

You should erase some messages so the answering system can record new messages.

NOTE: The unit also answers after the 10th ring if it is turned off. To access the answering system, enter your 3-digit security code.

Belt Clip and Optional Headset

Connecting the Belt Clip

1.To attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset.

2.Snap the ends of the belt clip into place.

Connecting an Optional Headset to the Handset

Each handset can be used with an optional headset hands free operation.

1.Connect the headset to the headset jack on the side of the handset. The handset receiver and microphone are disabled when the headset is connected.

2.Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately two to three inches from your mouth.

3.Press the TALK button to answer a call or make calls using the headset.

4.To return to normal operation, unplug the headset from the jack.

48