Message Alert

This feature sets your answering system to give an alert tone every 10 seconds when there are new messages.

From the Answerer Menu:

1.Press the CALLER ID-VOLUME (5or 6) button to scroll to the MESSAGE ALERT sub-menu.

2.Press mute/menu OK button to enter the menu. NEW MSG ALERT 1ON 2OFF shows in the display.

3.Use the touch-tone pad to enter the selection, or use the CALLER ID-VOLUME (5or 6) button to scroll to the 1ON or 2OFF. The default setting is 2OFF.

4.Press the mute/menu OK button to confirm. You will hear a confirmation tone and the new setting shows in the display.

Security Code

You can access the answering system from a tone dialing telephone in another (remote) location. The security code is required for remote access, and it prevents unauthorized access to your answering system.

From the Answerer menu:

1.Press the CALLER ID-VOLUME (5or 6) button to scroll to the SECURITY CODE sub-menu.

2.Press mute/menu OK button to enter the menu. SECURITY CODE 1 2 3 shows in the display.

3.Use the touch-tone pad to enter your new 3-digit security code. The default setting is 123.

4.Press the mute/menu OK button to confirm. You will hear a confirmation tone and the new security code shows in the display.

NOTE: If you make a mistake, use the delete/intercom/conf button to delete the security code and begin again.

Speaker Volume

Use the volume (5or 6) buttons to adjust speaker volume on the base to a comfortable level. L1 is the minimum speaker volume and L5 is the maximum.

18

Page 18
Image 18
GE 28821 manual Message Alert, Security Code, Speaker Volume