4.To cancel the page, press the END/cancel, delete/intercom/conf, or TALK button on the originating handset, or press the END/cancel button on the receiving handset.

Paging All Handsets from a Handset

(applicable only with additional handsets)

1.Make sure the originating phone is OFF (not in TALK mode).

2.Press and release the delete/intercom/conf button on a handset. PAGING EXTENSION? shows in the display.

3.Use the touch-tone pad to enter the handset number you want to page. (1= to page Handset 1, 2=to page handset 2, etc., and * tone=to page all handsets)

4.To cancel the page, press the END/cancel, delete/intercom/conf, or TALK button on the originating handset, or press the END/cancel button on the receiving handset.

Paging from the Base/Group Page

Use the base-only to page all registered handsets at the same time.

1.Press the find button on the base. All handsets beep for two minutes, and PAGING FROM BASE shows on each handset’s display.

2.To cancel the page, press the find button on the base, or press the TALK button or the END/cancel button on each handset.

Mute

To have a private, off-line conversation, use the MUTE feature. The party on the telephone line cannot hear you, but you can hear them.

1.Press the mute/menu OK button. The handset display shows MUTE ON.

2.Press the mute/menu OK button to cancel and return to your phone conversation.

Receiver Volume Control

When the handset is ON (in TALK mode) you may adjust the receiver volume by pressing the CALLER ID-VOLUME ( 6 or 5) button. There are five volume levels to choose from. When the maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and VOL 5 is maximum.

37

Page 37
Image 37
GE 28821 manual Paging All Handsets from a Handset, Paging from the Base/Group, Mute, Receiver Volume Control