Default Setting

As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings.

From the Handset Setup Menu:

1.Press the CALLER ID-VOLUME ( 6 or 5) button to scroll to the DEFAULT SETTING sub-menu.

2.Press the mute/menu OK button to enter the menu. DEFAULT SETTING 1YES 2NO shows in the display. The default setting is 2NO.

3.Use the touch-tone pad to select 1YES or 2NO, or use the CALLER ID-VOLUME ( 6 or 5) button to move the cursor to 1YES or 2NO.

NOTE: If you choose YES all the settings in the programmable menu are returned to factory default setting.

4.Press the mute/menu OK button to save your selection. You will hear a confirmation tone.

Telephone Operation

Visual Indicators

Base

The charge/in use voicemail indicator on the base will flash to alert you to an incoming call, during paging, or if you have a message waiting from your service provider. The indicator will remain lit when a handset is in the base charging or when the line is in use.

Handset

The TALK and SPEAKER indicator buttons flash when you receive a call and remain lit during a call.

The keypad and CID will also light when a call is received.

VMWI / Visual Ringer Indicator on Handset

IMPORTANT: In order to use this unit’s Voice Mail Waiting Indicator (VMWI) feature, you must subscribe to this service from your phone company.

The VMWI indicator on the top of the handset flashes when you receive a new message from your service provider. Also, it serves as a Visual Ringer function. It will flash when there is an incoming call.

33

Page 33
Image 33
GE 28821 manual Telephone Operation, Visual Indicators