Indicates the total number of messages. The voice time/day stamp needs to be set. Answering system is turned off.
The system is answering a call. Answering system memory is full.
The system is recording a memo or an announcement.
External line remote answering system.
Answering System Display Messages
The following messages show the status of the answering system or help you set up and use the system.
CL (blinking)
- -
An (blinking)
F (blinking)
Six bars (blinking)
LA (Line Access)
Handset Sound Signals
Signal | Meaning |
A long warbling tone | Signals an incoming call |
(with ringer on) |
|
Three short beeps | Page signal |
(several times) |
|
One beep every 7 seconds | Low battery warning |
Troubleshooting Guide |
|
Telephone Solutions
No dial tone
•Check or repeat installation steps:
Make sure the base power cord is connected to a working electrical outlet. Make sure the telephone line cord is connected to the base and the wall jack.
•Connect another phone to the same jack. If it doesn’t work, the problem might be your wiring or local service.
•The handset may be out of range of the base. Move closer to the base.
52
