JVC LPT0970-001A, 0504CSH-ID-VT manual 18 EN, Basic Playback

Page 18

18 EN

OPERATIONS ON VHS DECK

Basic Playback

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Clean the video heads using a dry cleaning cassette — ECL-3F — when:

●Rough, poor picture appears while a tape is played back.

●The picture is unclear or no picture appears.

●“USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON”). ( pg. 63)

NOTE:

The heads get dirty in the following cases:

●in an environment prone to extreme temperature or humidity

●in a dusty environment

●flaw, dirt or mold on video tapes

●continuous usage for a long time

A Load a cassette.

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit.

●Do not apply too much pressure when inserting.

●If the record safety tab has been removed, playback begins automatically. Although the DVD deck is selected, the VHS deck is selected automatically if the DVD deck is in stop mode.

●The unit’s power comes on automatically and the counter is reset to 0:00:00.

B Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

C Find the programme start point.

If the tape is advanced past the start point, press 3. To go forward, press 5.

D Start playback.

Press 4. “BEST” appears blinking on the front display panel during automatic tracking. ( pg. 23)

E Stop playback.

Press 8. Then press x on the VHS deck to remove the cassette.

Usable cassettes

● Compact VHS camcorder recordings can be played on this unit.

Simply place the recorded cassette

into a VHS Cassette

Adapter and it can be used just like any full-sized VHS cassette.

●This video recorder is equipped with SQPB (S-VHS QUASI PLAYBACK) that lets you watch tapes recorded in the S-VHS format and the SP mode with regular VHS resolution.

*SQPB does not deliver Super VHS resolution.

●This video recorder can record on regular VHS and Super VHS cassettes. However, it will record regular VHS signals only.

*S-VHS recording is not possible with this recorder.

Image 18

Contents HR-XV32E Safety Precautions Use only discs marked with the followingFor Italy Contents Unplayable Discs About DiscsPlayable Discs Region NumberPlacing a Disc File Structure of DiscsCare and Handling of Discs Place the discFront View Infrared Beam Receiving Window M Front Display Panel pgCassette Loaded Mark Mode Display L-1, L-2, F-1 or SAT DVD Mode IndicatorTape Remaining Time Indicator pg On the tape BeginningEndRemote Control How To UseSituate the unit Check the contentsBasic Connections Connect the unit to TVTurn on the unit Auto Set Up10 EN Select your countryOn the front display panel Perform Auto Set UpConfirm/Set video channel Press rt to select Auto and press OK or e12 EN Preset DownloadPerform Preset Download Set the video channelLink Functions 14 EN Monitor SetDVD deck Language Access the Country Set screenPress VCR so that the VCR indicator lights up Select the VHS deck16 EN Access the DVD Set Up menu screenSee Language Code List pg Press rt to move H to on Screen LANGUAGE, then press OKLanguage Code List 18 EN Basic PlaybackPlayback Features Repeat Playback 20 ENInstant ReView Manual TrackingBasic Recording 22 EN Recording FeaturesInstant Timer Recording ITR Tape Remaining TimeReceiving Stereo and Bilingual Programmes PlaybackRecording Showview Timer Programming 24 ENSatellite Receiver Users Engage the unit’s timer modeVPS/PDC Recording Repeat steps B G for each additional programmeExpress Timer Programming 26 ENCancel or change a programme Disengage the timer modeAccess the Programme Check screen Return to the timer modeSelect the programme to modify Cancel or change programme setting28 EN Overlapping programmes blink on the TV screenBefore performing the following steps Select the L-2 Select modeRecording mode Set L-2 Select to A/V or SAT. pg30 EN Load the discPause playback Access the DVD menu Locating a desired scene using the DVD menuAccess the PBC menu Locating the start point of the item or skip the itemMemorize a resume point 32 ENResume Function Resume playbackAccess the selection menu Zooming 3D PhonicSelect the effect level VFP function Adjusting the picture quality 34 ENAccess the on-screen bar Select the optionChange the time information Select the repeat mode36 EN Select the menu itemTo cancel A-B Repeat Playback Access the repeat modeWhen using the Repeat button Select the start point38 EN Time SearchChapter Search To clear the programme table Press Play Setup Programme PlaybackSelect the tracks in the desired order Random Playback Access the menu40 EN Subtitle SelectionAngle Selection Select the view anglePress Angle Select the audio language When using the A.MONITOR buttonAudio Language Selection Press A.MONITORFor Video CD Audio Channel SelectionSelect the audio channel For Svcd44 EN Parental LockTo change the settings To temporarily release the Parental LockCountry/Area Code List for Parental Lock 46 ENPage About MP3 Disc What is MP3?48 EN MP3 control displaySelect the group Using the MP3 control displayMP3 Playback Press w e to select the desired groupTo start playback by specifying the group/track number 50 ENGroup/track selection To return to the MP3 control displayWhat is JPEG? About Jpeg DiscJpeg control display Press rt to select the desired file, then press OK or Using the Jpeg control display52 EN Slide-show playback starts from the selected fileZooming Press Play Setup while the Jpeg Control screen is displayedGroup/file selection To return to the Jpeg control display54 EN Start the source player Set the input mode of recording deckEngage the Record Pause mode of the recording deck Start the recording deck56 EN DubbingFrom DVD to VHS Prepare the audio device for dubbing Select the input modePlace a disc and load an MD For the digital audio device58 EN Operate the TV TV Multi-Brand Remote ControlSet the TV brand code 01, 23, 24Simple Connections Connecting To a Satellite Receiver60 EN Perfect ConnectionsConnect the decoder Select the input modeMake connections Set the tunerAccess the Mode Set screen Mode Set VHS deckAccess the Main Menu screen 62 ENWhen you use the Direct Rec function, be sure to use a TV For Example64 EN About Ntsc PlaybackCounter and tape remaining time readings will be incorrect Press rt to move H to RESUME, then press OK Mode Set DVD deckFor each mode setting, see pages 66 to Press rt to select ON, then press OKPicture Settings Audio Settings66 EN Digital Others SettingsPlayback discs Audio CD/Video CDAuto Channel Set 68 ENTuner Set Perform Auto Channel SetManual Channel Set When Receiving a Scrambled Broadcast 70 ENDelete a Channel Set Stations a Set Stations B72 EN TV Station And ID ListVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode Set the RF output system74 EN Clock SetYou can disable the unit’s operation Child LockSet the Child Lock Playback VHS deck 76 ENTape Transport VHS deck Playback DVD deckRecording VHS deck MP3 Playback DVD deckJpeg Playback DVD deck Scene is not recorded from multiple anglesTimer Recording VHS deck 78 ENScan system Signal systemMemory backup time Approx min Hz to 20,000 Hz Hi-Fi audio80 EN Time Search Timer Recording Top menu Tuner Set Country/Area Code ListSubtitle Selection Tape Position Indicator When programmes overlap each other82 EN Page HR-XV32E