JVC LPT0970-001A manual Safety Precautions, Use only discs marked with the following, For Italy

Page 2

2 EN

SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the unit for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING (VHS deck only)

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This unit can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM- compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this unit.

4.This unit cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

IMPORTANT

8Please read the various precautions on pages 2 and 3 before installing or operating the unit.

8It should be noted that it may be unlawful to re-record pre- recorded tapes, DVDs, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

CAUTION

A DVD/VCR IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/VCR USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.

WHEN THIS DVD/VCR IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS DVD/VCR.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

REPRODUCTION OF LABELS

WARNING LABEL INSIDE OF THE UNIT

Use only discs marked with the following.

DVD

Audio CDs

(8 cm /12 cm disc)

(8 cm /12 cm disc)

Video CDs

Super Video CDs

(8 cm /12 cm disc)

(8 cm /12 cm disc)

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS”and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder. However, S-VHS recording is not possible with this model.

This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to play back S-VHS recordings in the SP mode with regular VHS resolution.

HQ VHS is compatible with existing VHS equipment.

SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing users only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

For Italy:

“It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95”

The STANDBY/ON 1 button does not completely shut off mains power from the unit, but switches operating current on and off. “`” shows electrical power standby and “!” shows ON.

Video tapes recorded with this unit in the LP (Long Play) mode cannot be played back on a single-speed video recorder. (VHS deck only)

When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear.)

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

Image 2
Contents HR-XV32E For Italy Safety PrecautionsUse only discs marked with the following Contents Unplayable Discs About DiscsPlayable Discs Region NumberPlacing a Disc File Structure of DiscsCare and Handling of Discs Place the discFront View Infrared Beam Receiving Window M Front Display Panel pgCassette Loaded Mark Mode Display L-1, L-2, F-1 or SAT DVD Mode IndicatorTape Remaining Time Indicator  pg On the tape BeginningEndRemote Control How To UseSituate the unit Check the contentsBasic Connections Connect the unit to TVTurn on the unit Auto Set Up10 EN Select your countryOn the front display panel Perform Auto Set UpConfirm/Set video channel Press rt to select Auto and press OK or e12 EN Preset DownloadPerform Preset Download Set the video channelLink Functions DVD deck 14 ENMonitor Set Language Access the Country Set screenPress VCR so that the VCR indicator lights up Select the VHS deck16 EN Access the DVD Set Up menu screenSee Language Code List  pg Press rt to move H to on Screen LANGUAGE, then press OKLanguage Code List 18 EN Basic PlaybackPlayback Features Repeat Playback 20 ENInstant ReView Manual TrackingBasic Recording 22 EN Recording FeaturesInstant Timer Recording ITR Tape Remaining TimeRecording Receiving Stereo and Bilingual ProgrammesPlayback Showview Timer Programming 24 ENSatellite Receiver Users Engage the unit’s timer modeVPS/PDC Recording Repeat steps B G for each additional programmeExpress Timer Programming 26 ENCancel or change a programme Disengage the timer modeAccess the Programme Check screen Return to the timer modeSelect the programme to modify Cancel or change programme setting28 EN Overlapping programmes blink on the TV screenBefore performing the following steps Select the L-2 Select modeRecording mode Set L-2 Select to A/V or SAT.  pgPause playback 30 ENLoad the disc Access the DVD menu Locating a desired scene using the DVD menuAccess the PBC menu Locating the start point of the item or skip the itemMemorize a resume point 32 ENResume Function Resume playbackSelect the effect level Access the selection menuZooming 3D Phonic VFP function Adjusting the picture quality 34 ENAccess the on-screen bar Select the optionChange the time information Select the repeat mode36 EN Select the menu itemTo cancel A-B Repeat Playback Access the repeat modeWhen using the Repeat button Select the start pointChapter Search 38 ENTime Search Select the tracks in the desired order To clear the programme table Press Play SetupProgramme Playback Random Playback Access the menu40 EN Subtitle SelectionPress Angle Angle SelectionSelect the view angle Select the audio language When using the A.MONITOR buttonAudio Language Selection Press A.MONITORFor Video CD Audio Channel SelectionSelect the audio channel For Svcd44 EN Parental LockTo change the settings To temporarily release the Parental LockCountry/Area Code List for Parental Lock 46 ENPage About MP3 Disc What is MP3?48 EN MP3 control displaySelect the group Using the MP3 control displayMP3 Playback Press w e to select the desired groupTo start playback by specifying the group/track number 50 ENGroup/track selection To return to the MP3 control displayJpeg control display What is JPEG?About Jpeg Disc Press rt to select the desired file, then press OK or Using the Jpeg control display52 EN Slide-show playback starts from the selected fileZooming Press Play Setup while the Jpeg Control screen is displayedGroup/file selection To return to the Jpeg control display54 EN Start the source player Set the input mode of recording deckEngage the Record Pause mode of the recording deck Start the recording deckFrom DVD to VHS 56 ENDubbing Prepare the audio device for dubbing Select the input modePlace a disc and load an MD For the digital audio device58 EN Operate the TV TV Multi-Brand Remote ControlSet the TV brand code 01, 23, 24Simple Connections Connecting To a Satellite Receiver60 EN Perfect ConnectionsConnect the decoder Select the input modeMake connections Set the tunerAccess the Mode Set screen Mode Set VHS deckAccess the Main Menu screen 62 ENWhen you use the Direct Rec function, be sure to use a TV For ExampleCounter and tape remaining time readings will be incorrect 64 ENAbout Ntsc Playback Press rt to move H to RESUME, then press OK Mode Set DVD deckFor each mode setting, see pages 66 to Press rt to select ON, then press OK66 EN Picture SettingsAudio Settings Digital Others SettingsPlayback discs Audio CD/Video CDAuto Channel Set 68 ENTuner Set Perform Auto Channel SetManual Channel Set Delete a Channel When Receiving a Scrambled Broadcast70 EN Set Stations a Set Stations B72 EN TV Station And ID ListVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode Set the RF output system74 EN Clock SetSet the Child Lock You can disable the unit’s operationChild Lock Playback VHS deck 76 ENTape Transport VHS deck Playback DVD deckRecording VHS deck MP3 Playback DVD deckJpeg Playback DVD deck Scene is not recorded from multiple anglesTimer Recording VHS deck 78 ENScan system Signal systemMemory backup time Approx min Hz to 20,000 Hz Hi-Fi audio80 EN Time Search Timer Recording Top menu Tuner Set Country/Area Code ListSubtitle Selection Tape Position Indicator When programmes overlap each other82 EN Page HR-XV32E