JVC LPT0970-001A, 0504CSH-ID-VT manual 26 EN, Express Timer Programming

Page 26

26 EN

OPERATIONS ON VHS DECK (cont.)

Express Timer

Programming

If you do not know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your unit to timer-record the programme.

Before performing Express Timer Programming:

●Make sure that the unit’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The unit will come on automatically.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Example: To timer-record the programme from 21:00 to 22:00 on 25th December, on channel 1.

A Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

B Access the SHOWVIEW screen.

Press PROG.

C Access the Programme screen.

Press START +/–. (If you’re just starting out, “P1” appears.)

D Enter the programme start time.

Press START +/– to enter the time you want recording to start.

●Press and hold START +/– to

move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

E Enter the programme stop time.

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

F Enter the programme date.

Press DATE +/–.

●The current date appears on the TV screen. The date you enter appears in its place.

G Enter the channel position.

Press PR +/–.

H Set the tape speed.

Press p.

I Set the VPS/PDC mode.

Press VPS/PDC (number key “7”) to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen, “VPS/PDC” is set to “ON”.

●If “VPS/PDC OFF” is displayed on the TV screen, “VPS/PDC”

is set to “OFF”.

“VPS/PDC Recording” on page 25.

J Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

●Repeat steps B – J for each additional programme.

K Engage the unit’s timer mode.

Press #. The unit turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # again.

Image 26

Contents HR-XV32E For Italy Safety PrecautionsUse only discs marked with the following Contents Unplayable Discs About DiscsPlayable Discs Region NumberPlacing a Disc File Structure of DiscsCare and Handling of Discs Place the discFront View Infrared Beam Receiving Window M Front Display Panel pgCassette Loaded Mark Mode Display L-1, L-2, F-1 or SAT DVD Mode IndicatorTape Remaining Time Indicator pg On the tape BeginningEndRemote Control How To UseSituate the unit Check the contentsBasic Connections Connect the unit to TVTurn on the unit Auto Set Up10 EN Select your countryOn the front display panel Perform Auto Set UpConfirm/Set video channel Press rt to select Auto and press OK or e12 EN Preset DownloadPerform Preset Download Set the video channelLink Functions DVD deck 14 ENMonitor Set Language Access the Country Set screenPress VCR so that the VCR indicator lights up Select the VHS deck16 EN Access the DVD Set Up menu screenSee Language Code List pg Press rt to move H to on Screen LANGUAGE, then press OKLanguage Code List 18 EN Basic PlaybackPlayback Features Repeat Playback 20 ENInstant ReView Manual TrackingBasic Recording 22 EN Recording FeaturesInstant Timer Recording ITR Tape Remaining TimeRecording Receiving Stereo and Bilingual ProgrammesPlayback Showview Timer Programming 24 ENSatellite Receiver Users Engage the unit’s timer modeVPS/PDC Recording Repeat steps B G for each additional programmeExpress Timer Programming 26 ENCancel or change a programme Disengage the timer modeAccess the Programme Check screen Return to the timer modeSelect the programme to modify Cancel or change programme setting28 EN Overlapping programmes blink on the TV screenBefore performing the following steps Select the L-2 Select modeRecording mode Set L-2 Select to A/V or SAT. pgPause playback 30 ENLoad the disc Access the DVD menu Locating a desired scene using the DVD menuAccess the PBC menu Locating the start point of the item or skip the itemMemorize a resume point 32 ENResume Function Resume playbackSelect the effect level Access the selection menuZooming 3D Phonic VFP function Adjusting the picture quality 34 ENAccess the on-screen bar Select the optionChange the time information Select the repeat mode36 EN Select the menu itemTo cancel A-B Repeat Playback Access the repeat modeWhen using the Repeat button Select the start pointChapter Search 38 ENTime Search Select the tracks in the desired order To clear the programme table Press Play SetupProgramme Playback Random Playback Access the menu40 EN Subtitle SelectionPress Angle Angle SelectionSelect the view angle Select the audio language When using the A.MONITOR buttonAudio Language Selection Press A.MONITORFor Video CD Audio Channel SelectionSelect the audio channel For Svcd44 EN Parental LockTo change the settings To temporarily release the Parental LockCountry/Area Code List for Parental Lock 46 ENPage About MP3 Disc What is MP3?48 EN MP3 control displaySelect the group Using the MP3 control displayMP3 Playback Press w e to select the desired groupTo start playback by specifying the group/track number 50 ENGroup/track selection To return to the MP3 control displayJpeg control display What is JPEG?About Jpeg Disc Press rt to select the desired file, then press OK or Using the Jpeg control display52 EN Slide-show playback starts from the selected fileZooming Press Play Setup while the Jpeg Control screen is displayedGroup/file selection To return to the Jpeg control display54 EN Start the source player Set the input mode of recording deckEngage the Record Pause mode of the recording deck Start the recording deckFrom DVD to VHS 56 ENDubbing Prepare the audio device for dubbing Select the input modePlace a disc and load an MD For the digital audio device58 EN Operate the TV TV Multi-Brand Remote ControlSet the TV brand code 01, 23, 24Simple Connections Connecting To a Satellite Receiver60 EN Perfect ConnectionsConnect the decoder Select the input modeMake connections Set the tunerAccess the Mode Set screen Mode Set VHS deckAccess the Main Menu screen 62 ENWhen you use the Direct Rec function, be sure to use a TV For ExampleCounter and tape remaining time readings will be incorrect 64 ENAbout Ntsc Playback Press rt to move H to RESUME, then press OK Mode Set DVD deckFor each mode setting, see pages 66 to Press rt to select ON, then press OK66 EN Picture SettingsAudio Settings Digital Others SettingsPlayback discs Audio CD/Video CDAuto Channel Set 68 ENTuner Set Perform Auto Channel SetManual Channel Set Delete a Channel When Receiving a Scrambled Broadcast70 EN Set Stations a Set Stations B72 EN TV Station And ID ListVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode Set the RF output system74 EN Clock SetSet the Child Lock You can disable the unit’s operationChild Lock Playback VHS deck 76 ENTape Transport VHS deck Playback DVD deckRecording VHS deck MP3 Playback DVD deckJpeg Playback DVD deck Scene is not recorded from multiple anglesTimer Recording VHS deck 78 ENScan system Signal systemMemory backup time Approx min Hz to 20,000 Hz Hi-Fi audio80 EN Time Search Timer Recording Top menu Tuner Set Country/Area Code ListSubtitle Selection Tape Position Indicator When programmes overlap each other82 EN Page HR-XV32E