JVC 0504CSH-ID-VT Place a disc and load an MD, Prepare the audio device for dubbing, Insert an MD

Page 57

EDITING (DVD DECK)

EN 57

Digital Audio Dubbing

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Recorder

Digital audio device (MD deck etc.)

Optical cable (not provided)

DIGITAL AUDIO OUT

Player

Note for connection:

Remove the connector cover from the unit and remove the protection cap from the cable.

You can dub selected audio from the DVD or Audio CD disc to an MD etc.

However, it is not possible to dub copy-protected discs.

Example: Dubbing to an MD

A Make connections.

Connect the optical cable between the unit and the digital audio device.

B Place a disc and load an MD.

For the DVD deck

APress x on the DVD deck to open the disc tray. B Place the disc in the disc tray.

C Press x on the DVD deck to close the disc tray.

For the digital audio device

Insert an MD.

C Prepare the DVD deck for dubbing.

APress DVD and select the audio to be dubbed.

BSearch for the point where you want to start dubbing

by pressing 4, 5 or 3 then press 8.

CPress 3 a little, then press 4 to start playback. D Press 9 to pause playback a little before the start

point.

D Prepare the audio device for dubbing.

Select the input mode.

E Start dubbing.

APress 4 to start playback on the DVD deck. B Start recording on the audio device.

F End dubbing.

Stop recording on the audio device. Then press 8 to stop playback on the DVD deck.

NOTES:

●There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts.

●You can also dub audio from a Video CD or SVCD. Set “DIGITAL AUDIO OUTPUT” to “PCM ONLY”. ( pg. 66)

Image 57

Contents HR-XV32E Safety Precautions Use only discs marked with the followingFor Italy Contents Playable Discs About DiscsUnplayable Discs Region NumberCare and Handling of Discs File Structure of DiscsPlacing a Disc Place the discInfrared Beam Receiving Window M Front Display Panel pg Front ViewTape Remaining Time Indicator pg Mode Display L-1, L-2, F-1 or SAT DVD Mode IndicatorCassette Loaded Mark On the tape BeginningEndHow To Use Remote ControlBasic Connections Check the contentsSituate the unit Connect the unit to TV10 EN Auto Set UpTurn on the unit Select your countryConfirm/Set video channel Perform Auto Set UpOn the front display panel Press rt to select Auto and press OK or ePerform Preset Download Preset Download12 EN Set the video channelLink Functions 14 EN Monitor SetDVD deck Press VCR so that the VCR indicator lights up Access the Country Set screenLanguage Select the VHS deckSee Language Code List pg Access the DVD Set Up menu screen16 EN Press rt to move H to on Screen LANGUAGE, then press OKLanguage Code List Basic Playback 18 ENPlayback Features Instant ReView 20 ENRepeat Playback Manual TrackingBasic Recording Instant Timer Recording ITR Recording Features22 EN Tape Remaining TimeReceiving Stereo and Bilingual Programmes PlaybackRecording 24 EN Showview Timer ProgrammingVPS/PDC Recording Engage the unit’s timer modeSatellite Receiver Users Repeat steps B G for each additional programme26 EN Express Timer ProgrammingAccess the Programme Check screen Disengage the timer modeCancel or change a programme Return to the timer mode28 EN Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeBefore performing the following steps Set L-2 Select to A/V or SAT. pg30 EN Load the discPause playback Access the PBC menu Locating a desired scene using the DVD menuAccess the DVD menu Locating the start point of the item or skip the itemResume Function 32 ENMemorize a resume point Resume playbackAccess the selection menu Zooming 3D PhonicSelect the effect level 34 EN VFP function Adjusting the picture qualitySelect the option Access the on-screen bar36 EN Select the repeat modeChange the time information Select the menu itemWhen using the Repeat button Access the repeat modeTo cancel A-B Repeat Playback Select the start point38 EN Time SearchChapter Search To clear the programme table Press Play Setup Programme PlaybackSelect the tracks in the desired order 40 EN Access the menuRandom Playback Subtitle SelectionAngle Selection Select the view anglePress Angle Audio Language Selection When using the A.MONITOR buttonSelect the audio language Press A.MONITORSelect the audio channel Audio Channel SelectionFor Video CD For SvcdParental Lock 44 ENTo temporarily release the Parental Lock To change the settings46 EN Country/Area Code List for Parental LockPage 48 EN What is MP3?About MP3 Disc MP3 control displayMP3 Playback Using the MP3 control displaySelect the group Press w e to select the desired groupGroup/track selection 50 ENTo start playback by specifying the group/track number To return to the MP3 control displayWhat is JPEG? About Jpeg DiscJpeg control display 52 EN Using the Jpeg control displayPress rt to select the desired file, then press OK or Slide-show playback starts from the selected fileGroup/file selection Press Play Setup while the Jpeg Control screen is displayedZooming To return to the Jpeg control display 54 EN Engage the Record Pause mode of the recording deck Set the input mode of recording deckStart the source player Start the recording deck56 EN DubbingFrom DVD to VHS Place a disc and load an MD Select the input modePrepare the audio device for dubbing For the digital audio device58 EN Set the TV brand code TV Multi-Brand Remote ControlOperate the TV 01, 23, 2460 EN Connecting To a Satellite ReceiverSimple Connections Perfect ConnectionsMake connections Select the input modeConnect the decoder Set the tunerAccess the Main Menu screen Mode Set VHS deckAccess the Mode Set screen 62 ENFor Example When you use the Direct Rec function, be sure to use a TV64 EN About Ntsc PlaybackCounter and tape remaining time readings will be incorrect For each mode setting, see pages 66 to Mode Set DVD deckPress rt to move H to RESUME, then press OK Press rt to select ON, then press OKPicture Settings Audio Settings66 EN Playback discs Others SettingsDigital Audio CD/Video CDTuner Set 68 ENAuto Channel Set Perform Auto Channel SetManual Channel Set When Receiving a Scrambled Broadcast 70 ENDelete a Channel Set Stations B Set Stations aTV Station And ID List 72 ENExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set Set the RF output systemClock Set 74 ENYou can disable the unit’s operation Child LockSet the Child Lock Tape Transport VHS deck 76 ENPlayback VHS deck Playback DVD deckJpeg Playback DVD deck MP3 Playback DVD deckRecording VHS deck Scene is not recorded from multiple angles78 EN Timer Recording VHS deckMemory backup time Approx min Signal systemScan system Hz to 20,000 Hz Hi-Fi audio80 EN Subtitle Selection Tape Position Indicator Country/Area Code ListTime Search Timer Recording Top menu Tuner Set When programmes overlap each other82 EN Page HR-XV32E