JVC LPT0970-001A, 0504CSH-ID-VT manual 66 EN, Picture Settings, Audio Settings

Page 66

66 EN

SUBSIDIARY SETTINGS (cont.)

* The default setting is bold in the table below.

Picture Settings

8MONITOR TYPE —

16:9 NORMAL / 16:9 AUTO / 4:3 LB / 4:3 PS

You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to “Monitor Set (DVD deck)” ( pg. 14).

8PICTURE SOURCE —

VIDEO (NORMAL) / VIDEO (ACTIVE) / FILM / AUTO

You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source).

Normally set to “AUTO”.

VIDEO (NORMAL): Suitable for playing back a video source disc with relatively a few movements.

VIDEO (ACTIVE): Suitable for playing back a video source disc with relatively a lot of movements.

FILM: Suitable for playing back a film or progressive source disc.

AUTO: Used to play back a disc containing both video and film source materials. This unit recognizes the picture type (film or video source) of the current disc according to the disc information.

●If the playback picture is unclear or noisy, or the oblique lines of the picture are rough, try to change to other modes.

8SCREEN SAVER — ON / OFF

The TV screen may be burned out if a static picture is displayed for a long time. When this function is set to “ON”, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu is displayed for over 5 minutes.

NOTE:

This function is not available for Audio CDs and MP3 discs.

8MP3/JPEG — MP3 / JPEG

You can select files to play back, when both MP3 files and JPEG files are recorded on a disc.

MP3: Select this to play back MP3 files.

JPEG: Select this to play back JPEG files.

NOTE:

You cannot access the DVD Set Up screen and “X” appears on the TV screen if a disc is already placed.

Audio Settings

8DIGITAL AUDIO OUTPUT —

PCM ONLY / DOLBY DIGITAL/PCM / STREAM/PCM

Set to the appropriate mode according to the type of the device connected to DIGITAL AUDIO OUT connector on the rear of unit.

It is not necessary to set this mode when you connect no device to the DIGITAL AUDIO OUT connector.

PCM ONLY: Select this when you connect the unit’s DIGITAL AUDIO OUT connector to the linear PCM digital input connector of another audio device.

DOLBY DIGITAL/PCM: Select this when you connect the unit’s DIGITAL AUDIO OUT connector to the digital input connector of a Dolby Digital decoder or an amplifier with a built-in Dolby Digital decoder.

STREAM/PCM: Select this when you connect the unit’s DIGITAL AUDIO OUT connector to the digital input connector of an amplifier with a built-in DTS, Dolby Digital, or MPEG multichannel decoder.

8ANALOG DOWN MIX — DOLBY SURROUND / STEREO

Set to the appropriate mode according to your audio system when you play back a DVD VIDEO disc recorded with surround multichannel audio. This setting affects only the analogue audio output signal from the AUDIO OUT connectors when playing back a DVD VIDEO disc recorded with surround multichannel audio.

DOLBY SURROUND: Select this when you enjoy multichannel surround audio by connecting the unit’s analogue AUDIO OUTPUT connectors (DVD) to a surround decoder or an internal amplifier.

STEREO: Select this when you enjoy conventional 2-channel stereo audio by connecting the unit’s analogue AUDIO OUTPUT connectors (DVD) to a stereo amplifier/receiver or TV, or when you dub audio of a DVD VIDEO disc recorded with surround audio to your MD, cassette, etc.

NOTE:

The “ANALOG DOWN MIX” function does not work when the 3D Phonic function is activated. ( pg. 33)

8D. RANGE CONTROL —

WIDE RANGE / NORMAL / TV MODE

The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format.

This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. WIDE RANGE: Select this to inactivate this function when you

enjoy wide dynamic range programme.

NORMAL: Normally select this setting to activate this function.

TV MODE: Select this when you hear the sound through the TV's speaker(s).

NOTES:

●This function works only when playing back a disc recorded with Dolby Digital format. The setting is not effective for other discs.

●This function does not work when the 3D Phonic function is activated. ( pg. 33)

8OUTPUT LEVEL — STANDARD / LOW

You can lower the output level of analog audio to accommodate the unit to the connected A/V equipment.

STANDARD: Normally select this.

LOW: The output level of analog audio is lowered.

Page 65 Page 67
Image 66
Page 65 Page 67
Contents HR-XV32E Safety Precautions Use only discs marked with the followingFor Italy Contents Unplayable Discs About DiscsPlayable Discs Region NumberPlacing a Disc File Structure of DiscsCare and Handling of Discs Place the discFront View Infrared Beam Receiving Window M Front Display Panel pgCassette Loaded Mark Mode Display L-1, L-2, F-1 or SAT DVD Mode IndicatorTape Remaining Time Indicator  pg On the tape BeginningEndRemote Control How To UseSituate the unit Check the contentsBasic Connections Connect the unit to TVTurn on the unit Auto Set Up10 EN Select your countryOn the front display panel Perform Auto Set UpConfirm/Set video channel Press rt to select Auto and press OK or e12 EN Preset DownloadPerform Preset Download Set the video channelLink Functions 14 EN Monitor SetDVD deck Language Access the Country Set screenPress VCR so that the VCR indicator lights up Select the VHS deck16 EN Access the DVD Set Up menu screenSee Language Code List  pg Press rt to move H to on Screen LANGUAGE, then press OKLanguage Code List 18 EN Basic PlaybackPlayback Features Repeat Playback 20 ENInstant ReView Manual TrackingBasic Recording 22 EN Recording FeaturesInstant Timer Recording ITR Tape Remaining TimeReceiving Stereo and Bilingual Programmes PlaybackRecording Showview Timer Programming 24 ENSatellite Receiver Users Engage the unit’s timer modeVPS/PDC Recording Repeat steps B G for each additional programmeExpress Timer Programming 26 ENCancel or change a programme Disengage the timer modeAccess the Programme Check screen Return to the timer modeSelect the programme to modify Cancel or change programme setting28 EN Overlapping programmes blink on the TV screenBefore performing the following steps Select the L-2 Select modeRecording mode Set L-2 Select to A/V or SAT.  pg30 EN Load the discPause playback Access the DVD menu Locating a desired scene using the DVD menuAccess the PBC menu Locating the start point of the item or skip the itemMemorize a resume point 32 ENResume Function Resume playbackAccess the selection menu Zooming 3D PhonicSelect the effect level VFP function Adjusting the picture quality 34 ENAccess the on-screen bar Select the optionChange the time information Select the repeat mode36 EN Select the menu itemTo cancel A-B Repeat Playback Access the repeat modeWhen using the Repeat button Select the start point38 EN Time SearchChapter Search To clear the programme table Press Play Setup Programme PlaybackSelect the tracks in the desired order Random Playback Access the menu40 EN Subtitle SelectionAngle Selection Select the view anglePress Angle Select the audio language When using the A.MONITOR buttonAudio Language Selection Press A.MONITORFor Video CD Audio Channel SelectionSelect the audio channel For Svcd44 EN Parental LockTo change the settings To temporarily release the Parental LockCountry/Area Code List for Parental Lock 46 ENPage About MP3 Disc What is MP3?48 EN MP3 control displaySelect the group Using the MP3 control displayMP3 Playback Press w e to select the desired groupTo start playback by specifying the group/track number 50 ENGroup/track selection To return to the MP3 control displayWhat is JPEG? About Jpeg DiscJpeg control display Press rt to select the desired file, then press OK or Using the Jpeg control display52 EN Slide-show playback starts from the selected fileZooming Press Play Setup while the Jpeg Control screen is displayedGroup/file selection To return to the Jpeg control display54 EN Start the source player Set the input mode of recording deckEngage the Record Pause mode of the recording deck Start the recording deck56 EN DubbingFrom DVD to VHS Prepare the audio device for dubbing Select the input modePlace a disc and load an MD For the digital audio device58 EN Operate the TV TV Multi-Brand Remote ControlSet the TV brand code 01, 23, 24Simple Connections Connecting To a Satellite Receiver60 EN Perfect ConnectionsConnect the decoder Select the input modeMake connections Set the tunerAccess the Mode Set screen Mode Set VHS deckAccess the Main Menu screen 62 ENWhen you use the Direct Rec function, be sure to use a TV For Example64 EN About Ntsc PlaybackCounter and tape remaining time readings will be incorrect Press rt to move H to RESUME, then press OK Mode Set DVD deckFor each mode setting, see pages 66 to Press rt to select ON, then press OKPicture Settings Audio Settings66 EN Digital Others SettingsPlayback discs Audio CD/Video CDAuto Channel Set 68 ENTuner Set Perform Auto Channel SetManual Channel Set When Receiving a Scrambled Broadcast 70 ENDelete a Channel Set Stations a Set Stations B72 EN TV Station And ID ListVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode Set the RF output system74 EN Clock SetYou can disable the unit’s operation Child LockSet the Child Lock Playback VHS deck 76 ENTape Transport VHS deck Playback DVD deckRecording VHS deck MP3 Playback DVD deckJpeg Playback DVD deck Scene is not recorded from multiple anglesTimer Recording VHS deck 78 ENScan system Signal systemMemory backup time Approx min Hz to 20,000 Hz Hi-Fi audio80 EN Time Search Timer Recording Top menu Tuner Set Country/Area Code ListSubtitle Selection Tape Position Indicator When programmes overlap each other82 EN Page HR-XV32E
Top Page Image Contents