Connecting an Antenna or Cable TV
aAntenna:
Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. If your antenna cable is flat connect it to a
bCable TV:
If your cable connection has no converter or descrambler, unscrew the cable from your TV and attach it to the ANT.IN jack on the DVD+VCR. If a converter is required connect a coaxial cable from the wall jack to the IN connector on the converter, and a coaxial cable from the OUT connector on the convert- er to the ANT.IN on your DVD+VCR. This cable hookup permits both TV and DVD+VCR operation.
a | Antenna | Antenna |
|
To view or record a CATV channel
1Tune the TV to the DVD+VCR output channel (CH 3 or 4).
2Set the DVD+VCR channel selector to the cable output channel. (Example: CH3)
3Select a channel using the cable converter.
Notes:
•With this connection, you cannot record one pro- gram while viewing another.
•If you are using a cable box to tune channels, it is not necessary to do Auto Channel Set.
Basic TV Connections
Make one of the following connections, depending on the capabilities of your TV.
Rear of TV
ANTENNA | VIDEO | AUDIO INPUT | |
INPUT | INPUT |
|
|
|
| L | R |
R V A1
OR 
OR
Rear of DVD+VCR
C | A2 | S |
b | Rear of DVD+VCR |
|
Pr | Pb | Y | R | L |
|
COMPONENT/PROGRESSIVE SCAN | AUDIO INPUT | ||||
| VIDEO INPUT |
| |||
INPUT
Rear of TV
RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied
10