JVC HR-XVC40B, HR-XVC41S manual Optional TV Connections

Page 11

How to set the DVD+VCR’s RF output channel

1.When the DVD+VCR is turned off, press and hold CH (+/-) on the front panel for more than five sec- onds. “RF03” or “RF04” appears in the display window.

2.Press CH (+/-) to change the RF output channel (RF03 or RF04). Tune the TV to this channel.

3.Turn off the DVD+VCR.

Audio/Video connection

1.Connect the DVD/VCR VIDEO OUT jack on the DVD+VCR to the video in jack on the TV using the video cable supplied (V).

2.Connect the Left and Right DVD/VCR AUDIO OUT jacks on the DVD+VCR to the audio left/right in jacks on the TV (A1) using the supplied audio cables.

Note:

If you use this connection, set the TV’s source selec- tor to VIDEO.

Optional TV Connections

These connections support only DVD playback. The tuner and VCR still output through the RF.OUT (R) or DVD/VCR OUT (A, V) jacks.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in jack on the TV using the S-Video cable (S).

Component Video / Progressive Scan connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD+VCR’s progressive scan output for the highest video resolution possible.

Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD+VCR to the corre- sponding in jacks on the TV using an optional Y Pb Pr cable (C).

Notes:

•Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack and S-VIDEO OUT jack).

•When you use Component Video signal, set the Progressive Scan to “Off” on the setup menu.

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled.

Audio connection

Connect the Left and Right AUDIO OUT jacks of the DVD+VCR to the audio left/right in jacks on the TV using the supplied audio cables (A2).

Preparation

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents HR-XVC40B HR-XVC41S NE PAS Ouvrir Important Safety Instructions Contents Moisture Condensation About the Symbol DisplaySymbol Used in this Manual Regional Code Types of Playable DiscsDisplay Windows Front PanelPause Remote ControlAbout the Remote Control DVD OUT Rear PanelBasic TV Connections Connecting an Antenna or Cable TVOptional TV Connections Digital Multi-channel sound Accessory Audio/Video A/V Connections to unitConnection to an Amplifier Manual Clock Set Initial Settings VCRGeneral Operation Auto Clock SetTo Add or Erase Channels Auto Channel ProgrammingTo go to the next level Initial Settings DVDDisplaying Disc Information on-screen DVD To display and exit the MenuTV Aspect Display ModeMenu Language Disc Audio / Subtitle / MenuLock Parental Control E. Black Level Expansion Password Security CodeArea Code Auto PlayRemote Control A/B/C Code Switching Remote Control FunctionVCR Tape Playback MTS Multi-Channel TV Sound VHS Hi-Fi Stereo MTS BroadcastCM Skip Commercial Skip Hi-Fi Stereo Audio SoundTo pause the recording Timer RecordingVCR Tape Recording Basic InstructionsProgram Priority Checking or Erasing the Timer ProgramExtending the Recording Time Instant Timer RecordingChecking the Recording Time Copying from DVD to VCR On-Screen Display VCREasy Information Additional VCR InformationVCR Auto Play System VHS Quasi Playback SqpbButtons Operations Discs Playback SetupGeneral features Additional features ID3 TAG Playing an Audio CD or MP3/WMA fileProgrammed Playback Viewing a Jpeg Disc Playable Codec format Playing a DivX Movie filePlayable DivX file Playable Subtitle formatPlaying a DVD VR format Disc Maintenance and ServiceReference Symptom Cause Correction TroubleshootingReference General SpecificationsVCR Specifications DVD SpecificationsHR-XVC40B / HR-XVC41S
Top Page Image Contents