Displaying Disc Information on-screen - DVD
You can display various information about the disc loaded
1.Press DISPLAY to show various playback infor- mation.
The items displayed differ depending on the disc type or playing status.
1 / 3 
1 / 12
0:20:09
Initial Settings - DVD
By using the DVD Setup menu, you can make vari- ous adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 16 to 18.
To display and exit the Menu:
Press SETUP MENU to display the menu. A second press of SETUP MENU will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
Preparation
ABC | 1 ENG |
1 / 1
3D SUR
2.You can select an item by pressing v / V and change or select the setting by pressing b / B.
Title (Track) – Current title (or track). number/total number of titles (or tracks). Chapter – Current chapter number/total number of chapters.
Time – Elapsed playing time.
Audio – Selected audio language or channel. Subtitle – Selected subtitle.
Angle – Selected angle/total number of angles. Sound – Selected sound mode.
Note:
If no button is pressed for a few seconds, the on- screen display disappears.
General Operation
1.Press DVD on the remote control.
2.Press SETUP MENU. The Setup menu appears.
3.Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).
4.Use v / V to select the second desired option then press B to move to the third level.
5.Use v / V to select the desired setting then press ENTER (OK) to confirm your selection. Some items require additional steps.
6.Press SETUP MENU or N (PLAY) to exit the Setup menu.
15