Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Symptom | Cause | Correction |
|
|
|
|
|
No power. | The power cord is disconnected. | Plug the power cord into the wall out- |
|
|
| let securely. |
|
|
|
|
|
The power is on, but | DVD or VCR button is not switched | Refer to page 6. |
|
the DVD+VCR does | properly. |
|
|
not work. |
|
|
|
No disc is inserted. | Insert a disc or tape. (Check that the |
| |
|
| ||
| No tape is inserted. | disc or tape indicator in the display |
|
|
| window is lit.) |
|
|
|
|
|
No picture. | The TV is not set to receive DVD+VCR | Select the appropriate video input |
|
| signal output. | mode on the TV so the picture from |
|
|
| the DVD+VCR player appears on the |
|
|
| TV screen. |
|
|
|
|
|
| The video cable is not connected | Connect the video cable into the jacks |
|
| securely. | securely. |
|
|
|
|
|
| Wrong connection. | Check the connection. |
|
|
|
|
|
No sound. | The equipment connected with the | Select the correct input mode of the |
|
| audio cable is not set to receive | audio receiver so you can listen to the |
|
| DVD+VCR signal output. | sound from the DVD+VCR. |
|
|
|
|
|
| The audio cables are not connected | Connect the audio cable into the jacks |
|
| securely. | securely. |
|
|
|
|
|
| The power of the equipment connected | Turn on the equipment connected with |
|
| with the audio cable is turned off. | the audio cable. |
|
|
|
|
|
| The AUDIO options are set to the wrong | Set the AUDIO options to the correct |
|
| position. | position. |
|
|
|
|
|
The playback picture is | The disc is dirty. | Clean the disc. |
|
poor. |
|
|
|
The TV channels are not tuned in properly. | Check tuning, carry out tuning again. |
| |
|
| ||
|
|
|
|
| Tape heads are dirty. | Clean video heads. |
|
|
|
|
|
| Tape is a rental or was recorded on | Use CH (v/V) for manual tracking |
|
| another VCR. | adjustment while tape is playing. |
|
|
|
|
|
| This unit can only output 525p | Make sure that your TV can support |
|
| Progressive scan picture. | 525p Progressive scan picture or set |
|
|
| Progressive scan to off. |
|
|
|
|
|
The “PROGRESSIVE | DVD+VCR was turned off while setting | Keep pressing the x (STOP) button |
|
SCAN MODE” | the Progressive scan mode. | for more than 5 seconds. |
|
message remains to be | The Progressive Scan is set to “On” on |
|
|
displayed. |
|
| |
| the setup menu but is connected to a |
|
|
| standard(analog) television with compo- |
|
|
| nent video input. |
|
|
|
|
|
|
34