JVC HR-XVC40B manual Moisture Condensation, About the Symbol Display, Symbol Used in this Manual

Page 5

Introduction

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference.

This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location.

Moisture Condensation

Never operate the unit immediately after moving it from a cold location to a warm location. Leave it unplugged for two or three hours without operating it. If you use the unit in such a situation, it may damage discs/tapes and internal parts.

About the Symbol Display

” may appear on your TV display during opera- tion and indicates that the function is not permitted by this unit or the disc.

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Introduction

Symbol Used in this Manual

Note: Indicates special notes and operating fea- tures.

Tip: Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.

ALL

All discs listed below

DVD

DVD and finalized DVD±R/RW

VCD

Video CDs

ACD

Audio CDs

MP3

MP3 files

WMA

WMA files

DivX

DivX files

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor pic- ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

5

Image 5
Contents HR-XVC40B HR-XVC41S NE PAS Ouvrir Important Safety Instructions Contents Moisture Condensation About the Symbol DisplaySymbol Used in this Manual Regional Code Types of Playable DiscsDisplay Windows Front PanelPause Remote ControlAbout the Remote Control DVD OUT Rear PanelBasic TV Connections Connecting an Antenna or Cable TVOptional TV Connections Digital Multi-channel sound Accessory Audio/Video A/V Connections to unitConnection to an Amplifier General Operation Initial Settings VCRAuto Clock Set Manual Clock SetTo Add or Erase Channels Auto Channel ProgrammingDisplaying Disc Information on-screen DVD Initial Settings DVDTo display and exit the Menu To go to the next levelMenu Language Display ModeDisc Audio / Subtitle / Menu TV AspectLock Parental Control Area Code Password Security CodeAuto Play E. Black Level ExpansionRemote Control A/B/C Code Switching Remote Control FunctionVCR Tape Playback CM Skip Commercial Skip VHS Hi-Fi Stereo MTS BroadcastHi-Fi Stereo Audio Sound MTS Multi-Channel TV SoundVCR Tape Recording Timer RecordingBasic Instructions To pause the recordingProgram Priority Checking or Erasing the Timer ProgramExtending the Recording Time Instant Timer RecordingChecking the Recording Time Copying from DVD to VCR On-Screen Display VCRVCR Auto Play System Additional VCR InformationVHS Quasi Playback Sqpb Easy InformationButtons Operations Discs Playback SetupGeneral features Additional features ID3 TAG Playing an Audio CD or MP3/WMA fileProgrammed Playback Viewing a Jpeg Disc Playable DivX file Playing a DivX Movie filePlayable Subtitle format Playable Codec formatPlaying a DVD VR format Disc Maintenance and ServiceReference Symptom Cause Correction TroubleshootingReference VCR Specifications SpecificationsDVD Specifications GeneralHR-XVC40B / HR-XVC41S