Record Timer, Recording Programming | Magnavox MDVDVCR5 specification

Record Timer

1. Recording Programming

1-1.MENU OPERATIONS

(1)Press the [SETUP] button to call the Setup Menu in TV state.

Press the [ / ] buttons to select the line of “Record Timer” and press the [ENTER] button to conﬁ rm that.

(2)At that time, the VCR will check whether there are some errors or not:

•If the clock has not been set, then it will change to “Clock Set” screen automatically.

•If the PRs have not been set, then it will change to “Installation” screen automatically.

If there is no error, (2) screen appears.

Press the [ / ] buttons to select the empty (not occupied) record timer program.

Press the [ENTER] button to conﬁ rm that.

(3)Press the [ / ] buttons to select the type of the wanted timer recording.

(4)The [ENTER] button is pressed to conﬁ rm that, the data input screen for the new timer programming will appear.

•ONCE (In the case of selecting the type to “Once”)

(5)Press the [0-9] buttons to set a PR number or press the [ / ] buttons to select an external (AV). “PRs”: To choice the recording signals from the own tuner, which is built-in VCR to tune and detect broadcasting signals.

(6)Press the [0-9] buttons in the following order: start time -> end time -> start date.

In initial state, the start date will be displayed a current date automatically.

Also, if the day or the month is changed at the start date, the day of the week will be changed too automatically, changed after inputting the day.

•DAILY(MON-FRI) [In the case of selecting the type to “DAILY(MON-FRI)”]

All the procedures of daily (Mon-Fri) recording are the same as “once timer recording”.

•DAILY(MON-SAT) [In the case of selecting the type to “DAILY(MON-SAT)”]

All the procedures of daily (Mon-Sat) recording are the same as “once timer recording”.

•DAILY(MON-SUN) [In the case of selecting the type to “DAILY(MON-SUN)”]

All the procedures of daily (Mon-Sun) recording are the same as “once timer recording”.

•WEEKLY [In the case of selecting the type to “WEEKLY”]

All the procedures of daily (once a week) recording are the same as once timer recording.

Press the [ / ] buttons to select the tape speed and press the [ / ] button to input the next data.

Press the [ENTER] button at the screen to conﬁ rm that.

If the program overlaps with another one, which had already been programmed, the Error message will appear for 3 seconds and it will change to the screen for the “TIMER REVIEW” automatically.

If the program does not overlap, the Guide Message will appear for 3 seconds.