Symptom

“Power On” does not work.

It does not work even in “Power On”.

A videotape is not inputted in.

On inputting a videotape, the tape is re-ejected.

A videotape is not ejected.

A channel on video and a play screen does not appear.

Noise (screen noise) appears on

screen.

While in playing, noise appears.

Sound and screen are irregular. Sound comes out but screen does not appear.

Screen is irregular and stripes

appears.

“Screen Error” message is displayed in a screen.

Checks

•Please check whether a powre plug is inserted in an electric outlet.

•Please check whether a videotape is inserted in.

•Try to insert a plug again.

•Please check whether a power plug is inserted in an electric outlet.

•Please check whether a videotape is in.

•Please check whether a videotape is inserted in a

right direction (a side of transparent window should be on the upside)

•Have you inputted a videotape again just after the

tape was ejected? Please try it again after fully ejecting it.

•When a videotape forces to be ejected, the tape may not be inputted. In the case, please pull out an outlet, and then push the tape smoothly.

•That’s why a safe mode to protect a videotape is operated automatically. Please pull out the tape and input is again.

•In case the product is used for a long time, a videotape may not be ejected for a ﬁ lm inside may be stretched. In the case, please pull out a power plug for about 10mins and then press “EJECT” button.

•Please check your antenna’s connection.

•TV Channel should be ﬁ xed on video channel.

•Please check your antenna’s signal whether it may be weak. In case of its weakness, please use a frequency ampliﬁ er connected with the device.

•While in no use of VCR, was it turned on?

•While in recording a program, do you watch another channel?

•Please press “TRACKING” for better screen. Videotape may be poor. Try to change it to another one.

•Please use a head-cleaner to clean VCR heads. VCR heads may be contaminated.