Connecting to Optional Equipment
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic
Connect the Left and Right AUDIO OUT jacks on this unit to the audio left and right in jacks on your amplifi- er, receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
1.Connect this unit’s DIGITAL AUDIO OUT jack (COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital (coaxial) audio cable.
2.You will need to activate this unit’s digital output. (See “AUDIO” on page 19).
Digital Multi-channel sound
A digital
Warning:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
Rear of this unit
2 channel analog stereo or Dolby Surround connection.
DVD exclusive out |
| Digital |
| ||
| connection | |
|
| |
|
|
|
LR
COAXIAL
AUDIO INPUT | DIGITAL INPUT |
Amplifier (Receiver)
Notes:
If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
To see the audio format of the current DVD in the
Installation and Setup
11