JVC HR-XV45SEK, 3834RV0038A Before Operation-VCR part, Using your VCR for the very first time

Page 12

Before Operation-VCR part

Tuning in a video channel on your

TV

Notes:

The output frequency of this DVD+VCR is set at UHF channel 36. If channel 36 is already used by another TV station, or if the picture is distorted, you can change the transmitter channel of your DVD+VCR. Stages 5 ~ 8 will show you how to change the output frequency of your DVD+VCR.

Your TV receives signals from the DVD+VCR like another TV station. You have to select a channel number on your TV and tune it in so that you may watch video tapes. If you have used a SCART then your TV should already have a dedicated video channel built into it, usually called AV.

1.Make sure that you have correctly installed your DVD+VCR as described earlier in this book. Press 1/+ to turn on your DVD+VCR.

Turn on your TV.

2.Insert a pre-recorded video tape into your DVD+VCR and press N on the remote control. Select a TV channel which you wish to watch video.

Don’t worry if you don’t have a video-tape to play at this stage! If you switch your DVD+VCR on and continue stages 3 ~ 4, instead of seeing video playback tune your TV until you see a bright blue screen.

3.Tune this channel until the video picture is sharp and the sound is clear.

If you have used a SCART or AUDIO and VIDEO cables you will not have to tune your TV, simply select the AV channel. The AV channel is already pre-tuned for optimum video playback on your TV.

4.Store this channel on your TV.

You will need to look at the TV instruction book if you do not know how to do this.

5.Only carry out stages 5 ~ 8 if you cannot obtain clear video playback as described in stages 1 ~ 4.

Select a TV channel which you wish to watch video.

Make sure that your DVD+VCR is in standby pressing 1/+ on the remote control (only the clock will be displayed).

6.Press PROG. (-/+)on the front of your DVD+VCR for more than 4 seconds.

RF36 will appear in the display window.

The following picture will be displayed on the TV screen.

RF CHANNEL 36

7.Use PROG. (-/+)to select another video channel. You may select any channel number between 22 and 68.

8.Select a TV channel which you wish to watch video.

Press 1/+ on the front of your DVD+VCR when you have finished.

Tune this channel so that a bright blue screen appears.

Store this channel on your TV.

Notes:

Make sure that you have correctly installed your DVD+VCR and successfully tuned in a dedicated video channel on your TV. If you do not tune in a dedicated video channel on your TV you will be unable to view and record video tapes!

Using your VCR for the very first time

Following picture will display on the TV screen when you have just connected your video recorder for the very first time.

To make tuning TV stations, please follow stages 3 to 4 as shown "ACMS" (see p.14).

 

ACMS

Pr-12

OK i

ACMS

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents HR-XV45SEK Power Button Important notes on controlling this unitDVD Button VCR ButtonContents Symbol Used in this Manual About the Symbol DisplayCleaning Discs Handling DiscsTypes of Playable Discs DVDDisc-related terms DVD ±R / DVD ±RWMpeg MP3Eject OPEN/CLOSERemote Sensor Disc Tray Display window PROG.-/+TV/VCR DVDVCR ENTER/OKAerial Euro AV1 AUDIO/VIDEO VCR IN+OUT/DVD OUTRF.OUT Installation and Setup Connecting to a TV & Decoder or SatelliteConnecting to Optional Equipment Using your VCR for the very first time Before Operation-VCR partSetting the clock Manually To set the colour systemPress Press 1 or 2 to select SET. Press OK Press i to return to a TV pictureHow to using the main menu Tuning in TV Stations AutomaticallyPress OK to again to start the automatic tuning process Tuning in TV Stations Manually Press i, confirm the station placementIf you wish to manually tune other stations repeat stages 3 Deleting TV Stations Changing the order of TV StationsBefore Operation-DVD part On-Screen DisplayPlayback Status/Restrictions Initial Settings General OperationDisplay Mode DVD TV Aspect DVDSample Freq. Frequency DVD Dynamic Range Control DRC DVD DivXPBC VCD Auto Play DVDDivXR VOD DivX Password Security Code Lock Parental ControlRating DVD UnlockPlaying a tape Auto TrackingSharp Instant Timer Recording Press x to end recording. Press EjectVideo Plus+ Programming Press Video Plus+Programme Delivery Control PDC Timer recording using On Screen Display Press B and press v or V to switch VPS/PDC on or offPress Press 1 or 2 to select REC . Press OK If Timer record events Overlap ExampleGeneral Features Playing a DVD or Video CDStill Picture and Frame-by-Frame Playback Slow Motion DVD VCD DivXDVD Video Discs Repeat Chapter/Title/Off Video CDs, Divx discs Repeat Track/All/OffSpecial DVD Features Audio CD Or Enter and playback startsID3 TAG Audio CD and MP3 Disc Features Programmed Playback Audio CD or MP3 DiscsRepeat Programmed Tracks Erasing a Track from Program ListViewing a Jpeg Disc Maintenance and Service Playing a DVD VR format DiscHandling the Unit Playing a DivX Movie Disc Playable DivX filePlayable Subtitle format Playable Codec formatAdditional Features-VCR part On Screen Display Tape Counter Memory StopVideo Doctor Self-Diagnosis Hi-Fi Stereo Sound System Wide Screen CompatibilityTo set the decoder Additional Features Copying from DVD To VCRRecording from another video recorder Language Codes Area CodesChoose a area code from this list Troubleshooting Symptom Cause CorrectionSpecification Inputs VCROutputs DVD Outputs VCRPrecautions Some Dos And Donts On The Safe Use Of EquipmentHR-XV45SEK
Top Page Image Contents