JVC 3834RV0038A, HR-XV45SEK manual Setting the clock Manually, To set the colour system

Setting the clock Manually

The clock in your VCR controls time and date settings for your VCR.

The clock is set automatically during ACMS (Automatic Channel Memory System) when your VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually.

1.Press i.

Press 1 or 2 to select SET. Press OK.

The ACSS mode can be set to “OFF” by pressing OK if you want to set the time manually.

	HH MM	DD MM	YY
	- - : - -	- - . - - . - -		- - -
1	2	ACSS	:	ON
SET				OK i

2.Use the v or V on the remote control to alter the HOURS, MINUTES, DAY, MONTH and YEAR. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00.

The day of the week will appear automatically when you enter the year.

3.If you make a mistake press 1 or 2 and enter the correct details.

	HH	MM	DD	MM	YY
	8 :	00	1	. 01 .	05	SAB
1	2			ACSS	:	SPE.
SET						OK i

4. Press i to return to a TV picture.

To set the colour system

1.Press i.

2.The main menu will appear on the TV screen.

3.Press 1 or 2 to select the SYS and press OK.

4.Press 3 or 4 to select according to the COLOUR system used.

AUTO	1	2
PAL
MESECAMSET			SYS
fOSD			SYS
ON			i
OFF

5.Press 1 or 2 to select the RF AUDIO.

Press 3 or 4 to select according to the RF AUDIO used.

	RF-I/I
	RF-B/G1 2
	RF-D/KSETSYS
fOSD	SYS
ON	i
OFF

6. Press i to remove the menus from the TV screen.

Installation and Setup

13